590626

Gossen Metrawatt METRAHIT 30M Manual

17
Zoom out
Zoom in
Previous page
1/28
Next page
GMC-I Messtechnik GmbH 17
GB
For example:
• Select and read out measuring parameters
• Select measuring function and range
• Start measurement
• Read out measurement values
(online readout with simultaneous measurement:
shortest possible sampling period is 100 ms)
The interface is always active if the instrument is switched on.
13.1 Selecting Interface Parameters
Addr – Address
If several multimeters, interfaces or memory adapters are
connected to the PC, each device requires its own address.
Address number 1 should be assigned to the first device, 2 to
the second device etc.
rS232 – Baud Rate / Transmission Mode
The baud rate can be selected, and operation in the transmis-
sion mode can be simultaneously activated with the rS232
command. Transmission can be interrupted with the MENU/
ON| OFF key:
rAtE rS232 ↵ 9600 19200 ↵ .
14 Accessories
BD232 Interface adapter (without memory) allows for remote
control of the multimeter, as well as the transmission of
measurement data from up to six multimeters to the PC
.
METRAwin
10/METRAHit
Software
METRAwin
10/METRAHit
software is used to process and
display measurement data at a PC. Sampling can be triggered
manually with an adjustable sampling interval, or in a signal
dependent fashion. Storage of data in ASCII format can be
controlled with two trigger thresholds per measuring channel,
as well as by means of system time.
The following prerequisites must be fulfilled for the implementa-
tion of METRAwin
10/METRAHit
:
Software Requirements:
– MS WINDOWS XP, VISTA or 7
Hardware Requirements:
– IBM compatible Windows PC, Pentium processor with
200 MHz or better and at least 64 MB RAM
– SVGA monitor with at least 1024 x 768 pixels
– Hard disk with at least 40 MB available memory
– CD-ROM drive
– Microsoft compatible mouse
– Windows-supported printer
– 1 USB port for using USB-HIT
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gossen Metrawatt METRAHIT 30M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gossen Metrawatt METRAHIT 30M in the language / languages: English as an attachment in your email.

The manual is 0,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info