Manual Gossen Metrawatt METRAHIT 30M (page 16 of 28) (English)

590626

Zoom out

Zoom in

1/28

16 GMC-I Messtechnik GmbH

12.1 Description of Measurement Parameters

and Memory Commands

rAtE – Sampling Rate (storage or measuring rate)

The sampling rate determines the interval, after which the

respective measurement values are transmitted to the interface

or the measurement value memory.

The following sampling rates are possible:

rAtE ↵  OFF, 10 ms, 100 ms, 1 s, 10 s, 60 s.

If OFF is selected, individual measurement values can be

stored to memory by simultaneously activating the ESC|FUNC

and ↵ keys.

The display is reduced to 5½ places for the 100 ms sampling

rate, and to 4½ places for 10 ms.

Addr and rS232

See chapter 13.1, page 17.

SEnSor and tEMP

See chapter 10, page 12.

FILt – Filter

See above example.

12.2 InFo – Information Menu

tESt – RAM Test

Starting the RAM test:

rAtE  InFO ↵ tESt ↵

No other functions may be activated during the RAM test. Two

test samples are written to memory, and are subsequently

read out. If the test is completed successfully, “Good” appears

at the display.

See chapter 17, page 26, for additional display messages.

uEr – Firmware Version

The revision level of the current firmware version is briefly

displayed: rAtE  InFO ↵  uEr ↵ 070102.

MEM – Query Memory Occupancy

See description in chapter 11, page 14.

CLEAr – Delete Memory Content

See description in chapter 11, page 14.

CALdAtE – Date of Last Calibration

The date of the last calibration is briefly displayed:

rAtE  InFO ↵  CALdAtE ↵ 020399.

CALdUE – Next Recommended Calibration

The due date for the next recommended calibration is briefly

displayed: rAtE  InFO ↵  CALdAtE ↵ 020300.

12.3 Default Settings

Selected parameter settings for ADDR, RS232, CALDATE,

CALDUE and VER are retained in the memory after the multi-

meter is switched off. All other parameter changes are lost,

and the default settings are once again active when the instru-

ment is switched back on.

13 Data Transmission via RS232 Interface

The multimeter is equipped with an infrared interface for the

transmission of measurement data to a PC. Measurement val-

ues are optically transmitted via infrared light through the hous-

ing to an interface adapter (accessory), which is plugged into

the multimeter. The RS232 interface at the adapter allows for

connection to a PC via an interface cable. Furthermore, com-

mands and parameters can be uploaded from the PC to the

multimeter.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gossen Metrawatt METRAHIT 30M in the language / languages: English as an attachment in your email.

The manual is 0,39 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gossen Metrawatt METRAHIT 30M Manual

Product: