Manual Gossen Metrawatt METRA HIT 27I (page 18 of 28) (English)

590606

Zoom out

Zoom in

1/28

18 GMC-I Messtechnik GmbH

12.2.2 Memory Mode Operation – STORE Menu Function

Ð First set the sampling rate for memory mode operation,

and then start memory mode operation.

The sampling rate can also be changed during memory

mode operation.

Ð First select the desired measuring function and an

appropriate measuring range.

Ð Check the storage battery charge level before starting

long-term measurement recordings, see chapter 14.1 on

page 25. Connect the charger if necessary.

Starting Memory Mode Operation with Menu Functions

Ð Open the “Operating Mode” menu (refer to the menu

diagram) and select the StorE function.

Ð Now activate the  key to open the start menu for

memory mode operation: StArt blinks.

Activate the  key once again in order to start memory

mode operation: REM appears at the display.

Ð Press the  key in order to switch to the measuring

function.

A new memory block is created when another measuring

function is selected with the rotary switch or the FUNC key.

Data storage then continues automatically. The “SLEEP

MODE” is still active, i.e. the device is switched on and off

automatically at sampling rates of long duration

(see chapter 2).

When memory capacity has been exhausted, MEMO FULL

appears at the display, and an acoustic signal is generated

simultaneously. The signal can be deactivated by pressing

any key.

REM Display

The REM symbol indicates that memory mode operation has

been activated via menu function STORE.

Press the  key if you wish to monitor the measured values

also during the memory process.

The „STORE“ function cannot be started while the „DATA“

function is activated.

Exiting Memory Mode Operation with Menu Functions

Ð Select the StorE menu.

Ð Activate the  key: StOP blinks.

Ð Activate the  key once again: the auxiliary displays are

cleared. Memory mode operation has now been

deactivated.

Ð Press the  key in order to return to the measuring

function.

Ð Memory mode operation can also be exited by switching

the instrument off.

12.3 Querying Memory Occupancy – INFO  MEMO/OCCUP

Memory occupancy can be queried from the „1NF0 “ menu.

The main display shows current occupancy as a percentage

between 001 and 100%

12.4 Clearing the Memory – MEMO  CLEAr

Attention!

This function deletes all measured values from

memory.

This function cannot be performed during memory mode;

bUSY

MEMO

is displayed instead of CLEAR.

12.5 Activating the Default Values

Previously entered changes can be undone, and the default

settings can be reactivated. This may be advisable after the

occurrence of software or hardware errors.

Ð Simultaneously press and hold the FUNC, MAN|AUTO and

DATA| CLEAR keys, and switch the instrument on with the

ON|OFFkey.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gossen Metrawatt METRA HIT 27I in the language / languages: English as an attachment in your email.

The manual is 0,51 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gossen Metrawatt METRA HIT 27I

Gossen Metrawatt METRA HIT 27I Quick start guide - English, German - 4 pages

Gossen Metrawatt METRA HIT 27I User Manual - Dutch - 28 pages

Gossen Metrawatt METRA HIT 27I Quick start guide - French - 4 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gossen Metrawatt METRA HIT 27I Manual

Product: