590606
27
Zoom out
Zoom in
Previous page
1/28
Next page
GMC-I Messtechnik GmbH 27
16 Accessories
The BD232 interface adapter (without memory) allows for remote
control of the instrument, as well as transmission of
measurement data from up to six multimeters to a PC (in the
online operating mode with METRAwin
10).
Interface adapter USB-HIT is functionally identical to the BD232
interface adapter, although bidirectional transmission takes
place between the IR and the USB interface in this case.
The driver to be installed assigns a virtual COM interface to
the instrument. It is not possible to set up a multi-channel
system with this adapter.
METRAwin
10 Software
METRAwin
10 software is used to process and display
measurement data at a PC. Sampling can be triggered
manually with an adjustable sampling interval, or in a signal
dependent fashion. Storage of data in ASCII format can be
controlled with two trigger thresholds per measuring channel,
as well as by means of system time.
Hardware Requirements
a WINDOWS and IBM compatible PC with at least
a 200 MHz Pentium CPU and 64 MB main memory
VGA monitor with resolution 800 x 600 pixel or higher
Hard disk with at least 40 MB available memory
–a CD-ROM drive
Microsoft compatible mouse
If print-outs are required: a Windows supported printer
1 free serial RS232 interface COM1 ... COM8 for utilizing
BD232
or
1 USB port for utilizing USB-HIT
Software Requirements
MS Windows 98, ME, NT4.0, 2000, XP, VISTA (32/64 Bit)
or 7 (32 Bit).
General
The extensive accessories available for our measuring
instruments are checked for compliance with currently valid
safety regulations at regular intervals, and are expanded as
required for new applications. Currently up-to-date
accessories which are suitable for your measuring instrument
are listed at the following web address along with photo,
order number, description and, depending upon the scope of
the respective accessory, data sheet and operating
instructions: www.gossenmetrawatt.com
(english Products Measuring Technology – Portable
Multimeters METRA HIT ... Accessories).
17 Repair and Replacement Parts Service,
Calibration Center* and Rental Instrument Service
If required please contact:
GMC-I Service GmbH
Service Center
Thomas-Mann-Str. 20
90471 Nuremberg • Germany
Phone +49 911 817718-0
Fax +49 911 817718-253
E-Mail service@gossenmetrawatt.com
www.gmci-service.com
This address is only valid in Germany.
Please contact our representatives or subsidiaries for service
in other countries.
* Calibration Laboratory for Electrical Quantities
DKD – K – 19701 accredited as per DIN EN ISO/IEC 17025
Accredited quantities: direct voltage, DC value, DC resistance,
alternating voltage, AC value, AC active power, AC apparent power,
DC power, capacitance, frequency and temperature
Competent Partner
GMC-I Messtechnik GmbH is certified per
DIN EN ISO 9001:2000.
Our DKD Calibration Laboratory has been accredited in
accordance with DIN EN ISO/IEC 17025:2005 by the
Deutsche Kalibrierdienst (German Calibration Service) under
registration number DKD–K–19701.
Our competence in the field of metrology covers test reports,
Proprietary Calibration Certificates as well as DKD Calibration Cer-
tificates.
Our range of services is complemented by our Test Equipment
Management service which is provided free of charge.
An on-site DKD calibration station is an integral part of our ser-
vice department. If any faults are detected during calibration,
our specialists are able to carry out the necessary repairs with
original replacement parts.
Needless to say, in our function as calibration laboratory, we
calibrate all instruments, irrespective of the manufacturer.
DKD Calibration Certificate Reprints
If you order a DKD calibration certificate reprint for your
instrument, please provide us with the reference numbers
indicated in the upper and lower most fields of the calibration
seal. We do not need the instrument’s serial number.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gossen Metrawatt METRA HIT 27I at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gossen Metrawatt METRA HIT 27I in the language / languages: English as an attachment in your email.

The manual is 0,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gossen Metrawatt METRA HIT 27I

Gossen Metrawatt METRA HIT 27I Quick start guide - English, German - 4 pages

Gossen Metrawatt METRA HIT 27I User Manual - Dutch - 28 pages

Gossen Metrawatt METRA HIT 27I Quick start guide - French - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info