335443
6
Zoom out
Zoom in
Previous page
1/9
Next page
Instructions for Use, Building- in and Connecting
7
Major stains are removed with special ceramic-
glass cleansers. Follow strictly the manufacturer's
instructions.
Be careful to remove any remains of
cleansing agent from the hob surface,
otherwise they will be heated during the next
use and can damage the hob (fig. 3).
Stubborn and burnt stains are removed with
special ceramic-glass scraper. Be careful,
however, not to touch the hotplate surface with
the scraper handle (Fig. 4).
Handle the scraper with utmost care to avoid
injuries!
Sugar and sugar containing food may
permanently damage the ceramic-glass hob
surface (Fig.5), so the remains of sugar and
sugar containing food must be scraped off from
the hob surface immediately, when the hotplates
are still hot (Fig. 4).
Discoloring of ceramic-glass hob has no effect
whatsoever on its operation and stability. In most
cases, it appears as the consequence of burnt in
food remains, or as a result of dragging pots and
pans (especially aluminum or copper bottom
cookware) across the surface, and such
discoloring is rather hard to remove.
Note: All described faults are mostly esthetical
and do not affect directly the operation of the
appliance. Remedy of such faults is not covered
by warranty.
Troubleshooting guide
Repairs may be done by qualified personnel only.
Any unskilled attempt to repair the appliance is
extremely dangerous.
Before attempting any repairs disconnect the
appliance from the mains by removing the fuse or
unplugging the mains lead from the mains socket.
Any unskilled attempts and/or repairs may cause
electric shock and short circuit. To avoid such
injuries any repairs may be performed only by
qualified personnel or after sales service.
Note
There are, however, some minor faults which
may be easily removed by the user, in
accordance with the instructions that follow.
Important
If the malfunction of the appliance was caused by
the improper use, the service visit during the
warranty period is not free of charge.
Keep these instructions always on hand and if
you sell the appliance hand them over to the
new user.
Following are some simple advice how to repair
minor faults:
Fault Cause Remedy
Burner flame is not steady. Wrong setting of gas. Expert should set the gas escape
properly!
Burner flame suddenly
changes.
Incorrect assembly of burner
components.
Assemble the burner components
correctly!
Ignition of burners takes
excessively long.
Incorrect assembly of burner
components.
Assemble the burner components
correctly!
The flame goes off after
ignition.
Early release of control button.
Control button is not pushed in
firmly.
Keep the button pressed longer.
Before releasing the button, give it
one final solid push.
The color of the cooking zone
gas grid has changed.
Normal situation, caused by the
high temperature.
Clean the grid with metal cleaning
agents.
Electric operations are
generally disturbed.
Fuse is burned. Check the fuse in the fuse box, and
replace if required.
Electric ignition of burners
does not function.
Food residues or detergent block
the contact between the ignition
device and the burner.
Open and clean carefully the
opening between the ignition
device and the burner.
Burner crown caps look ugly. Usual staining. Clean the crown cap with metal
cleaning agents.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gorenje gcs 64 c at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gorenje gcs 64 c in the language / languages: English as an attachment in your email.

The manual is 0,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info