335443
4
Zoom out
Zoom in
Previous page
1/9
Next page
Instructions for Use, Building- in and Connecting
5
x
Be very precise when placing the burner crown
cap upon the crown. Always keep the crown
nozzles clean and free.
crown cap
burner crown
ceratin models only
thermal coupling
(certain models only)
correct position of
burner components
Ignition and operation of burners
Gas burners may be ignited with the electric
ignition device, built-in adjacent to each burner
(specific models only).
Single handed ignition
(specific models only)
To ignite the gas burner, press the selected
burner knob and turn it to the maximum power
position. The electric spark from the ignition
device flashes and sets fire to the escaping gas.
In case the electric ignition device may fail
due to power failure or moisture upon the
ignition spark, you may ignite the gas burner
with a simple match or a cigarette lighter.
Ignition of gas using both hands
(specific models only)
To ignite the gas burner, press the selected
burner knob and turn it to the maximum power
position. Now press the ignition device knob
several times. The electric spark from the ignition
device flashes and sets fire to the escaping gas.
In case the electric ignition device may fail
due to power failure or moisture upon the
ignition spark, you may ignite the gas burner
with a simple match or a cigarette lighter.
x Once the gas starts burning, keep the control
button pressed for about 10 seconds, until the
flame becomes constant.
x Release the button and set the desired power,
between the highest and the lowest position.
x Setting between the zero dot
and the
largest flame symbol is not recommended,
since the flame is not stable in that range, and
may easily get extinct.
x In case the flame goes out repeat the
procedure.
In case the burner fails to ignite
after 15 seconds, shut the gas to the burner off
and wait at least one minute before you attempt
to repeat the firing procedure.
x
If the burner flame is extinguished – for no
matter what reason – shut the gas to the burner
off and wait at least one minute before you
attempt to repeat the firing procedure.
x
Burner is switched off by turning the control
button to the right in the zero position
(black
dot).
gas faucet is closed
maximum power
minimum power
To ensure safe use of small
diameter dishes, place the
supplied extra wire grid upon
the auxiliary burner if
necessary.
Cookware
Selection of the adequate dish size ensures
optimized cooking time and consumption of gas.
Diameter of the dish is of utmost importance.
The flame reaching over the edge of the small
diameter dish may destroy the dish, while the
consumption of gas is increased.
Gas needs oxigen for burning. In case of
excessively large dish diameter the oxigen
supply is insufficient, consequently reducing the
burning capacity.
The wire grid (certain models only)
The wire grid is used for dishes with small
diameter. Place the grid over the auxiliary burner
crown.
Burner type Dish diameter
Large (3kW)
220-260 mm
Normal (1,75 kW)
180-220 mm
Auxiliary (1 kW)
120-180 mm
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gorenje gcs 64 c at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gorenje gcs 64 c in the language / languages: English as an attachment in your email.

The manual is 0,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info