615705
18
Zoom out
Zoom in
Previous page
1/38
Next page
18
10.4 Satellite Guide
When you enter to “Satellite Guide” menu, you will see
the screen like below:
“Satellite Guide” is use for user to enter local longitude;
local latitude and satellite longitude. By the evaluation
from the receiver evaluate the antenna azimuth and
antenna elevation; user can follow this guidance to
adjust antenna.
1 You can use number keys to input parameters in
“Local Longitude”, “Local Latitude” and “Satellite
Longitude”.
2 You can use [Left/Right] key to select east or west
in “Local Longitude” and “Satellite Longitude”,
select north and south in “Local Latitude”.
3 Moving highlight to “Start” item and press [OK]
key. The lower column on the screen will calculate
the corresponding value automatically.
4 Orientation means the angle between south and
satellite.
5 Press [Exit] key to draw back to “Main” Menu.
10.5 Terrestrial Installation
Press [OK] key to enter the selected item.
1 You can select the Bandwidth according different
country.
2 You can set the Tuner Power ON/OFF.
3 Press [Red] key can directly into blind scan mode
to scan the current programs.
4 Press [Green] key to enter the following menu.
Scan Mode.
1 There are two modes. You can scan channel
bychannel or by frequency”.
2 When scan band is UHF and region is “France”,the
range of Ch No. is from 21 to 69. When scan
3 band is VHF and region is “France”, the range of
Ch No. is from 1 to 9. (it’s according to region)
4 Press [Red] key to enter blind scan menu, or press
[Green] key to enter TP scan menu.
5 Press [Exit] key to exit the scanning.
10.6 Cable Installation
Press [OK] key to enter the selected item.
1 You can select the Scan Mode, Manual Scan or
Blind Scan.
2 You can input the Frequency by use the numeric
button of the RCU.
3 You can input the Second Frequency by use the
numeric button of the RCU, if you set the Scan
Mode to Blind Scan.
4 You can input the Symbol Rate by use the numeric
button of the RCU.
18


Need help? Post your question in this forum.

Forumrules
1

Forum

golden-interstar-voyager-2

Reset search

  • acces code for all in one remote controlpanel contour urc 1240 Submitted on 11-8-2023 at 07:57

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Golden interstar VOYAGER 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Golden interstar VOYAGER 2 in the language / languages: English as an attachment in your email.

The manual is 1,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info