Manual Golden interstar VOYAGER 2 (page 20 of 38) (English)

615705

Zoom out

Zoom in

1/38

 Display Mode is for switching the system

outputting video resolution. Move highlight on it

and press left or right key, it will switch video

resolution circularly by the sequence "AUTO", "By

Native TV","480p", "576P",

"720P_50","720P_60,"1080i_50"," 1080i_60" ,"

1080P_50" and" 1080P_60". This effect is equal to

press P/N Key under Full Screen and their last

setting saving will be efficient for each others. By

Source means system will set the video output

resolution according to the program it’s playing,

different resolution programs switching perhaps

will makes TV screen flickering. By Native TV

means system will be according to the HDMI TV’s

max supported resolution to set its resolution, if

system is not connected to a HMDI TV, it will set

resolution to be default

 Aspect Mode is for switching the screen aspect

ratio mode. Now we provide below options: 4:3

PS / 4:3 LB / 16:9/Auto. You can press [Left/Right]

key to select each mode circularly. 16:9 will

provide user pillar box mode it means user use

16:9 TV to display but need to see a 4:3 full display

picture. System will force press wide screen

picture to be narrow and there’re black band on left

and right site. Auto means system won’t do any

aspect ration translation, 16:9 picture source will

be good display on a 16:9 TV but will be too

narrow on a 4:3 TV, and 4:3 picture source will be

too wide in a 16:9 TV but will be good display in a

4:3 TV.

 Video Output: Press [Left/Right] to select RGB or

CVBS

 Digital Audio Out is for setting the both SPDIF and

HDMI’s digital audio output mode, it has options

LPCM Out, Auto, You can press [Left/Right] Key to

select each mode circularity. LPCM Out means

system will decode no matter AC3 or PCM audio

track data to be LPCM, digital audio decoder or

HDMI TV will get LPCM digital audio data. Auto

means system will detect which the connected

HDMI TV can decode and then output that data. If

HDMI TV can decode AC3, system just output

RAW data, if HDMI TV can decode LPCM only,

system will just decode AC3 or LPCM to be LPCM

and then output.

 Service Switch Mode: Press [left/right] button to

select unblank or blank.

 Brightness/Contrast/ Saturation : You can adjust

the parameter about the Video image by using the

[OK]button or press[Volume Up/Volume Down]

key, the default value is Level 10..

 OSD Transparency: Besides the setting of “OSD

Menu Style”, you also can set the transparency of

OSD. You can press [Left/Right] key to select the

values. There are 5 levels of transparency, 10%,

20%, 30%, and 40% and “NO” (means no

transparency function).

 Press [Menu] key to draw back from “TV System”

menu.

11.3 Ethernet Setting

1 Select your Network Type as Wired , Wireless or

3G Dongle , if you select Wireless, can configuring

Wi-Fi (wireless) as the following step:

a) Select Wireless on Default Network Type

item.

b) Press [red] button the wireless LAN network

list will appear, Select you Wi-Fi network and

press [ok] button, at last input password.

acces code for all in one remote controlpanel contour urc 1240 Submitted on 11-8-2023 at 07:57
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Golden interstar VOYAGER 2 in the language / languages: English as an attachment in your email.

The manual is 1,39 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Golden interstar VOYAGER 2 Manual

Product: