615705

Golden interstar VOYAGER 2 Manual

17
Zoom out
Zoom in
Previous page
1/38
Next page
17
2. In “TP Index” item, you not only can use
[Left/Right]key to select transponder but also can
use[Add] and [Delete]functions.
1. When you press[Green] key, it will display “New
TP” in “TP Index” item; You should set the
parameters of “TP Frequency” and “Symbol Rate”
for this new transponder. The parameters of “TP
Frequency” and “Symbol Rate” can set by number
keys. The available range are “3000~13450 MHz”
and “1000~45000Ks/s”.
2. When you press[Yellow] key, there will show up a
warning message for reminding whether you will
delete the current transponder or not. If you select
“Yes”, the current transponder will be deleted, and
the total account of transponder will reduce 1
correspondingly.
3. When you press [Blue] key, there will show up a
warning message for reminding whether you will
delete all transponders or not. If you select “OK”,
all transponders will be deleted.
3. For the existed transponder, you also can use
number keys to modify the parameters of “TP
Frequency” and “Symbol Rate”.
4. When you complete your modification, Press
[Red] key, it will show up a dialog to ask you
scan mode, program type, scan type and NIT
Search on/off. After you set up, press [OK] key to
start scanning.
5. In the “TP Scan” item, press [Exit] key to exit the
scanning and save the current parameters.
Single Scan
1. Press [Red] key, it will show up a dialog to ask
you scan mode (means you want to scan all
channels or only scan free channels), program
type (means you want to scan all channels or
only scan TV/Radio channels), scan type (means
preset scan, that is searching the existed TP.
Automatic Scan means blind scan. It is no need
existed TP info) and NIT Search on/off. After you
set up, press [OK] key to start scanning.
2. Press [White] key into the blind scanning
immediately.
TP Scan
Press [Green] key to scan current TP’s programs.
Auto DiSEqC
Press [Blue] key to run Auto DiSEqC function, it can find
the satellite connect to which port automatically.
Blind Scan
Press [White] key can directly into blind scan mode to
scan the current satellite.
10.2 FastScan Satellite
In this menu, you can search the channels fast
by select the provider and press OK button on
Start Search item.
10.3 Auto installation
“Auto Installation” is a very new and convenient function.
It will automatically detect all dishes connecting to this
machine and scan the available services belonging to
the satellite matched according to satellites and
transponders data in current database. You don’t have
to input any parameter of your antenna settings. Just
press “ OK ” button to enter this “Auto Installation” menu
then it starts scanning and shows you the result at the
end of scanning.
… 17 …


Need help? Post your question in this forum.

Forumrules
1

Forum

golden-interstar-voyager-2

Reset search

  • acces code for all in one remote controlpanel contour urc 1240 Submitted on 11-8-2023 at 07:57

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Golden interstar VOYAGER 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Golden interstar VOYAGER 2 in the language / languages: English as an attachment in your email.

The manual is 1,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info