656020
8
Zoom out
Zoom in
Previous page
1/14
Next page
Setting the Transmitter
Multi Flash Parameter Setting
1. Enter into multi flash mode before setting.
2. Long press the <MODE> Button to enter multi flash
parameter setting menu.
3. Then, (output value), T (flash times) and H (flash
frequency) will be displayed on the LCD panel.
4. Short press the <GR> Button to choose the
settings. Turn the Select Dial to change the blinking
setting amount. Continue to press the <GR> Button
until all the amounts are set. Then, short press the
<MODE> Button to exit.
As flash times are restricted by flash output value and flash frequency, it might get automatic
adjustment. The times that transported to the receiver end are a real flash time, which is also
related to the camera’s shutter setting.
X1T-N transmitter + camera flash or X1R-N receiver + camera flash uses multi flash function can
only have one flash, which is determined by Nikon Communication Protocol. However, TT685N and
AD360II can be triggered normally when working as receivers.
Setting the Transmitter
Group Settings
Test Flash
1. Press the <TEST> Trigger Button to see the whether flash
will fire normally or not.
2. Fully press the <TEST> Trigger Button, and the Status
Indicator Lamp turns red and the flash on the receive end
can be triggered.
3. Use the transmitter to control camera to focus or shoot,
and the transmitter is connecting to the camera (do not
connect to the flash) now.
4. In the standby mode, press the TEST Button can wake up
the receiver.
5. The settings on the transmitter end will synchronize to the
receiver end at the same time.
Multi Flash Group ON/OFF Settings
1. Open the multi flash in the C.Fn Custom Functions
(set C.Fn-04 as on).
2. Short press <MODE> button to change the mode
of selected group.
3. The current group’s mode will be changed
simultaneously by the order of on/-- (-- represents
OFF, which means that the current group will not
fire flashes in this mode).
CH
- 36 -- 35 -
1. Long press the <GR> Button to set all effective groups simultaneously.
2. The settings of all effective groups will blink. Turn the Select Dial to change the
settings, until one of the group's setting turns to the maximum or the minimum and all
settings of the effective groups will not change now.
3. If the current group is in the M mode, the power output value is changeable from 1/1
full power to Min. power in 0.3 stop increments, until one of the group’s setting turns to
the maximum(1/1) or the minimum(Min.). If the current group is in the TTL mode, all
the other groups which are in the M mode will change their FEC amount
simultaneously. The FEC amount is changeable from -3 to 3 in 0.3 stop increments,
until one of the group’s setting turns to the maximum(3) or the minimum(-3). If the
current group is in the -- mode (flash off), the amounts will not change.
4. If the groups in the M mode or TTL mode work together, the first FEC amount which
up to the maximum or the minimum is considered as the limitation.
5. Short press the <GR> Button again to confirm the setting.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Godox X1N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Godox X1N in the language / languages: English as an attachment in your email.

The manual is 5,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info