656020
9
Zoom out
Zoom in
Previous page
1/14
Next page
Setting the Transmitter
Automatically Enter Power Saving Mode
1. The flash trigger will go into standby mode after the transmitter enter sleep mode, and the
displays on the LCD panel will disappear.
2. Press any of the button (<TEST> fully pressed/<CH/OK>/<GR>/<MODE>) can wake up the
flash trigger. If the transmitter is attached to the Nikon DSLR camera, half press the shutter
can also wake up the system.
3. If the transmitter is set to single contact mode( isdisplayed), the system will not enter
power saving mode.
Setting the Transmitter
The following table lists the available and unavailable custom functions of this flash. The icon “√”
indicates the flash custom function is supported but “0”indicates the custom function is not
supported. Note: Some icons will be displayed when setting the relevant custom functions to make
users have a good understanding.
ON(The single contact mode set icon
is displayed.)
It is advisable to set the transmitter to single
contact mode when using it to trigger the flash
by PC cord or through camera’s single contact.
Settings and Description
No delay
Master flash synchronization delay N*100 us
(synchronization delay icon is displayed.)
OFF
Setting Signs
0
1~100
--
on
Functions
Synchronization
delay setting
Single contact
mode
Custom
Functions No.
C.Fn-00
C.Fn-01
Application
C.Fn: Setting Custom Functions
Settings and Description
Changing with camera's zoom value, Flash's
auto ZOOM functions should be turned on.
Zoom(20/24/28/35/50/70/80/105/135/
200mm)
PC sync socket connects with camera as an input
PC sync socket connects with flash as an output
Multi Flash OFF
Multi Flash ON
1/128
1/256
OFF
ON
3 groups are displayed
5 groups are displayed
Turn off the beeper on the receive end
Turn on the beeper on the receive end
Setting Signs
AU
20,24,28,35,50,70,
80,105,135,200
In
ou
--
on
1/128
1/256
--
on
03
05
--
on
Functions
Zoom setting
PC sync socket
as an
input/output
Multi Flash
ON/OFF
Minimum power
output value in
M/Multi mode
AF assist
Displayed
groups
Beeper
ON/OFF
Custom
Functions No.
C.Fn-02
C.Fn-03
C.Fn-04
C.Fn-05
C.Fn-06
C.Fn-07
C.Fn-08
Application
Modeling Lamp Control
Double-click the <CH/OK> Button to power ON/OFF the modeling lamp.
- 37 - - 38 -
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Godox X1N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Godox X1N in the language / languages: English as an attachment in your email.

The manual is 5,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info