656026
10
Zoom out
Zoom in
Previous page
1/15
Next page
Setting <Multi>
1 stroboscopic flash.
Press <MODE> button so
that < MULTI> is
displayed.
● Setting the stroboscopic
flash. (Page 38)
- 43 - - 44 -
Slave Unit Setting
2
Set the V860IIS that to be
controlled as the wireless
slave unit. (Page 42)
● The slave unit can be set
as A/B/C.
Check the communication
3 channel
If the master unit and
slave unit(s) are set to a
different channel, set them
to the same channel.
(Page 42)
Position the camera and
4 flashes
Position the camera and
flashes as the picture
shows. (Page 40)
Check that the flash is
5 ready
Check that the master
flash ready indicator is
lightened.
● When the slave flash
ready indicator is ready,
the AF-assist beam
lighting area will blinks at
1 second intervals.
Check the flash operation
6
Press the master unit’s
Test Button< >.
Then, the slave unit will
fire. If not, adjust the slave
unit’s angle toward the
master unit and distance
from the master unit.
The slave unit might be out of order or fire an unwanted flash
due to the nearby fluorescent lamp or computer screen.
If the slave unit’s auto power off function is workable, press
the master unit’s test button to power it on. Please note that
test firing is unavailable during the camera’s regular
metering time.
The effective time of slave auto power off is changeable.
(C.Fn-Sv APOT/ Page 49)
By making some settings, the auto AF-assist transmitter will
not blink after the slave unit’s flash ready indicator is
lightened. (C.Fn-AF/ Page 49)
Using Fully Automatic Wireless Flash
The FEC and other settings that set on the master unit will also be
appeared on the slave unit automatically. The slave unit does not
need any operation. Use the following settings to make wireless
flashes according to the same methods with normal flash shooting.
Flash Exposure Compensation ( / Page 36
About Master Unit
Use two or more master units. By preparing several cameras that
with master units flash attached, cameras can be changed in
shooting while keeping the same lighting source (slave unit).
5. M: Wireless Flash Shooting with Manual Flash
This describes wireless (multiple shooting) using manual flash. You
can shoot with a different flash output setting for each slave unit
(firing group). Set all parameters on the master unit.
Gr
Setting the flash mode to
1 <M>
Press Function Button 4
< > to choose groups.
Then, press Function
Button 3 < MODE > to set
the flash to M mode.
Setting flash output
2
When choosing the group,
press Function Button 2
< > to select the
power output. Turn the
Select Dial to set the flash
output of the groups.
Press the <SET> button
to confirm.
Taking the picture
3
Each group fires at the set
flash ratio.
6. Multi: Wireless Flash Shooting with Manual Flash
Press the <SET> button to
2 confirm.
Autoflash Shooting with One Slave Unit
4. TTL: Fully Automatic Wireless Flash Shooting
Master Unit Setting
1
Attach a V860IIS camera
flash on the camera and
set it as the master unit.
(Page 42)
M/A/B/C can be set as
TTL mode independently.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Godox V860IIS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Godox V860IIS in the language / languages: English as an attachment in your email.

The manual is 9,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info