811662

GO Swissdrive Evo control unit Manual

9
Zoom out
Zoom in
Previous page
1/23
Next page
1514
GO SWISSDRIVE
4. OVERVIEW MENU STRUCTURE
The menu structure of your Evo control unit consists of different menus which are
enabled depending on the riding situation.
For road-safety reasons the menu selection is limited during the ride to the main
menu, the tour data and the stopwatch. At standstill further menus are enabled in
which for example settings can be made or a mobile phone can be connected via
Bluetooth.
4.1. Menus in operation during the ride
In the driving mode the display of your Evo control unit is subdivided into ve sec-
tions (1):
- status bar (1a),
- display of the assistance level (1b),
- speed indicator (1c),
- menu position (1d) and
- variable section (1e) indicating the three different rinding menus.
The status bar shows various symbols giving you a quick overview of the current
state of the system. A detailed description of the individual elements is given in the
following chapter “Status bar”.
The currently selected assistance level is visualised by the graphics on the left edge
(2). By means of the +/–keys you can select between ve positive assistance levels
and two recuperation levels. By pressing the +key you select a higher assistance le-
vel, by pressing the –key you select a lower assistance level. By selecting assistance
level 0 the motor assistance is turned off.
The higher the assistance level, the more assistance is provided until you have
reached the end limit of the motor set by the manufacturer. The recuperation (the
feeding back of recovered energy into the battery and the motor brake) is correspon-
dingly strongest at the lowest level (-2).
The current speed of the pedelec/e-bike is indicated with one digit behind the deci-
mal point (3). In the settings you can choose between a display in kilometres per hour
(km/h) or in miles per hour (mph).
I The speed is only indicated correctly if the circumference of tyre of
your pedelec/e-bike is set correctly. You can adjust the circumference
of tyre in the settings (see chapter “Congurations and settings”).
The menu position indicates the selected screen with a symbol.
In the variable section you can select between the main menu, an overview of the
data relating to the current tour and a stop watch function. You can switch between
these menus by pressing the Scroll key (4). A detailed description of these menus
including respective functions is given in the chapters “Main menu”, “Overview tour
data” and “Stopwatch”.
4.2. Menus at standstill
At standstill of the pedelec/e-bike, further menus are enabled:
- an overview of the total data,
- the phone menu,
- the service menu,
- a menu for saving data on external devices and
- the conguration pages.
14
23
a
b
c
d
e
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for GO Swissdrive Evo control unit at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of GO Swissdrive Evo control unit in the language / languages: English as an attachment in your email.

The manual is 1.44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info