Manual GO Swissdrive Evo control unit (page 8 of 23) (English)

811662

Zoom out

Zoom in

1/23

1312

GO SWISSDRIVE

3. Function in the stopwatch menu: Start the stopwatch by pressing the Conrm

key when the stopwatch menu is indicated. Pressing the Conrm key once again

stops the measurement. Pressing the Conrm key long saves the measurement

and resets the stopwatch. If you want to continue the measurement after a pau-

se, just press the Conrm key once again.

4. Function in the standstill menus: At standstill the Conrm key serves to con-

rm selected options or the setting of parameters. After you have navigated with

the +/–keys to the desired button, you can conrm the selection of the option or

the execution of the function with the Conrm key. Examples for this function are

the deleting of the calling list in the phone menu or the selection of a language

in the system settings.

+/–Keys (1): With the +/–keys you can adjust the assistance level of the

GO SwissDrive system during the ride.

1. Selection of the assistance level: With the +/–keys you can select between

ve positive assistance levels and two recuperation levels. By pressing the +key

you select a higher assistance level, by pressing the –key you select a lower as-

sistance level. By selecting assistance level 0 the motor assistance is turned off.

The higher the assistance level, the more assistance is provided until you have

reached the speed limit of the motor set by the manufacturer. The recuperation

(the feeding back of recovered energy into the battery and the motor brake) is

correspondingly strongest at the lowest level (–2) (2).

2. Throttle mode: Pressing the +key long in the driving mode activates the throttle

mode to the front. Within the throttle mode the motor provides assistance without

additional pedalling. This makes it easier for you to push the pedelec/e-bike up

steep ramps or if the bicycle is heavily loaded. You need to push the pedelec/e-

bike slightly by hand to make the throttle mode start. The assistance stops as

soon as you release the key.

i If your vehicle has a throttle mode for moving backwards, this function

is activated by pressing the –key long in the driving mode. This func-

tion is analogous to the throttle mode towards the front.

I The function of the pushing aid can only be activated up to the adjus-

ted speed limit of 0-6 km/h (pedelecs) or 0-20 km/h (speed pedelecs).

By means of the GO SwissDrive service tools your dealer can modify

the maximum speed within this range. Please note that the adjustabili-

ty depends on country-specic statutory regulations.

3. Function in the standstill menus: In the conguration menus you can navigate

with the +/–keys between the individual buttons.

By pressing the –key you navigate to the next line. If there is more than one

option in one line, you navigate from the left to the right by pressing the –key.

Analogous to that you navigate to the previous line by pressing the +key. If there

is more than one option in one line, you navigate from the right to the left by

pressing the +key.

4. Setting numerical values: There are certain parameters, such as the circumfe-

rence of tyre, which request numerical inputs. These can be entered by pressing

the +/–keys starting from a given value. The value is increased by 1 by pressing

the +key and reduced by 1 by pressing the –key (3).

Scroll key (4): With the Scroll key you can switch between the individual menus

of your Evo control unit. The series of the menus is predetermined and cannot be

changed. You can, however, disable individual menus in the settings, if necessary.

Disabled menus are skipped when you browse through.

By pressing long on the Scroll key you return from each other menu to the main menu

(except: submenu of the conguration page).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of GO Swissdrive Evo control unit in the language / languages: English as an attachment in your email.

The manual is 1.44 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

GO Swissdrive Evo control unit Manual

Product: