Manual GO Swissdrive Evo control unit (page 6 of 23) (English)

811662

Zoom out

Zoom in

1/23

GO SWISSDRIVE

The currently selected assistance level is visualized by the graphics on the left edge

of the display (1). By means of the +/–keys you can select between ve positive

assistance levels and two recuperation levels. By pressing the +key you select a

higher assistance level, by pressing the –key you select a lower assistance level. By

selecting assistance level 0 the motor assistance is turned off.

The current speed of the pedelec/e-bike is indicated with one digit behind the deci-

mal point.

I The speed is only indicated correctly if the circumference of tyre of

your pedelec/e-bike is set correctly. You can adjust the circumference

of tyre in the settings (see chapter “Congurations and settings”).

The menu structure of your Evo control unit consists of different menus which are

enabled depending on the riding situation. In the variable display section (2) you

can select between the main menu, an overview of the data relating to the current

tour and a stop watch function. You can switch between these menus by pressing the

Scroll key. The menu position indicates the current menu with a symbol.

2.5. Menus at standstill

Whenever your pedelec/e-bike stands still, further menus are enabled:

- overview of the total data,

- phone menu,

- service menu,

- menu for saving data on external devices and

- conguration sides.

You can switch between these menus by pressing the Scroll key.

I During the ride the Evo control unit disables the menus which are only

available at standstill for road-safety reasons. If one of the standstill

menus is enabled when you set off, the Evo control unit switches au-

tomatically to the main menu.

2.6. Basic settings

Before you set off with your GO SwissDrive system you should do a few basic set-

tings. This applies in particular to the circumference of tyre, the preferred language

as well as the date and the time.

Adjust the circumference of tyre in the conguration menu under “System settings”.

The unit for the circumference of tyre is millimetre (mm).

To enter the data, call up the conguration menu (3) by pressing the Scroll key until

the conguration screen appears. Continue by navigating with the +/–keys to the

button “System settings“ and then press the Conrm key.

Continue by navigating with the +/–keys to the button “Circumference of tyre“ and

then press the Conrm key (4). You can now increase or reduce the circumference of

tyre with the +/–keys. Finish by pressing the Conrm key.

I Keep in mind that the circumference of tyre is the basis of many cal-

culations, such as the indicated speed, the distance you have ridden

and the remaining range. If possible, have this setting done when you

collect your pedelec/e-bike from the dealer.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of GO Swissdrive Evo control unit in the language / languages: English as an attachment in your email.

The manual is 1.44 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

GO Swissdrive Evo control unit Manual

Product: