811662

GO Swissdrive Evo control unit Manual

4
Zoom out
Zoom in
Previous page
1/23
Next page
54
GO SWISSDRIVE
1. INTRODUCTION
The Evo control unit is the communication interface with the GO SwissDrive system.
It offers you a huge number of functions and individualisation options. The following
chapter is a short overview with the description of the basic operation of the Evo con-
trol unit. You will nd a detailed description of all functions and conguration options
of the Evo control unit in the following chapters.
2. SHORT OVERVIEW
2.1. Components of the Evo control unit
The Evo control unit consists of three components (1):
- display (1a),
- docking station (1b) and
- handlebar remote (1c)
The display is the display unit of your Evo control unit.
The system is controlled by the keys of the handlebar remote.
The docking station connects the display with the other components of the GO
SwissDrive system. In addition, the docking station has a USB port through which
data can be transferred and cell phones can be charged up to a current of 1.0 A.
2.2. Mounting the display on the docking station
Mount the display on the upper edge of the docking station (2). Subsequently slide
the display opposite to the direction of motion until it engages with an audible click in
the docking station (3).
To remove the display press down the lever on the upper edge of the docking station
and slide the display to the front until it can be removed (4).
I If you want to mount the display permanently on the docking station,
it can be secured with a screw integrated into the docking station. To
mount and remove the display the screw has to be unscrewed nearly
fully by using a 3-mm Allen key. To secure the display with the screw,
mount the display rst and tighten the screw subsequently.
2.3. Operation of the Evo control unit
Your GO SwissDrive system is controlled by the handlebar remote, which can be
mounted on the right or left side of the handlebars close to the grips.
1
a
b
c
4
23
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for GO Swissdrive Evo control unit at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of GO Swissdrive Evo control unit in the language / languages: English as an attachment in your email.

The manual is 1.44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info