783843
10
Zoom out
Zoom in
Previous page
1/18
Next page
27
Auto record: start recording after stable data appear, pull out the nger to nish recording a group of data
(99 group of data at most), the total duration does not exceed 72 hours.
Manual record: after manual storage is started, the storage state needs to be terminated manually to
complete a group of store, store up to 24-hour data.
When the memory is full, it will display “Memory is full!”, then it will enter the standby mode after several
seconds. When exiting the standby mode next time, it will display “Memory is full!” to prompt user that
the memory has been full, press any button (power on/off excluded) again, it will enter the measure
interface.
Under manual mode, when “Record” is “ON”, the device will prompt to clear the data stored
last time.
It will display “Recording...” when there is no operation under record state for 30s, then it will enter ener-
gy saving mode after several seconds, pressing the “power on/off button”, the device would return to the
former interface; pressing any button(power on/off excluded), it will display “Recording”.
Under data recording state, after the display screen turns off automatically, in order to save
power, pulse sound indication will turn off automatically.
“Seg”: data segment.
After setting, press the “menu button” to exit storage menu, return to main menu.
“Delete All”: delete all records (auto record mode is shown as Figure 11).
Please upload data in time after recording, otherwise the data may be covered when the
storage space is full.
The historical data will be deleted once switching the mode. Under record state, the record
mode can not be switched; under manual mode, the record mode can be switched only when
turning off recording rstly.
Figure 11 Main menu Figure 12 Clock menu Figure 13 System menu
5.5.3 Clock setting
a. Connect the master device to synchronize device time
Under the PC software interface, after search for the device (refer to relative chapter (5.6) for the con-
nection method), then can synchronize the device time.
b. Set device time manually
Under main menu, press the “up button” or “down button” to select “Clock”, then press the “left button”
or “right button” to enter its setting interface shown in Figure 12.
Press the “up button” or “down button” to select the option to be adjusted, then press the “left button” or
“right button” to change the value.
ENGLISH
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gima OXY 50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gima OXY 50 in the language / languages: English as an attachment in your email.

The manual is 1.06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gima OXY 50

Gima OXY 50 User Manual - French - 19 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info