783843
9
Zoom out
Zoom in
Previous page
1/18
Next page
26
button” to enter next hour; Press “left button”, it will show “-” in the position, then press “Down button”
to enter last hour.
D. The Review Interface 2 shown based in Review Interface 1, the stored SpO2 value and PR value in
each second can be observed here, the underside date from left to right marks time, SpO2 value, PR
value. When the stored data exceeds the upper and lower limit set by user, the relevant value will
turn green.
E. Press “up button” to exit the review Interface, return to the measure interface.
5.4 Clock interface
In the measure interface, press the “right button” can enter the clock interface of Figure 8.Press the
“right button” again can return to the measure interface.
Figure 8. Clock interface Figure 9. Main Menu Figure 10 Setting for sound prompt
5.5 Menu operations:
In the measure interface,press the “menu button “can enter the menu of Figure9.Users can adjust the
setting through the main menu, such as the sound prompt, record, clock., system, etc. can be set,
methods are as followings:
5.5.1 Sound prompt setting
Under main menu, press the “up button” or “down button” to select “Prompt”, then press the “up button”
or “down button” to enter its setting interface shown in Figure 10.
Press the “up button” or “down button” to select the option to be adjusted, then press the “left button” or
“right button” to change the value.
“SpO2 HI(%)”: upper limit prompt for SpO2 over-limit
“SpO2 LO(%)”: lower limit prompt for SpO2 over-limit
“PR HI(bpm)”: upper limit prompt for PR over-limit
“PR LO(bpm)”: lower limit prompt for PR over-limit
“Prompt Sound”: prompt for over-limit, “off”: close, “on”: open.
“Pulse Sound”: PR sound, “off”: close, “on”: open.
Lower limit can not exceed the upper limit, and the upper limit can not be lower than the lower limit when
adjusting the values. SpO2 range: 0 % ~ 100 %, PR range: 0 ~ 254 bpm
The values displayed in Figure 10 are the initial values of over-limit prompt.
After setting, press the “menu button” to exit the Prompt Settings Menu interface, and return to “Main
Menu” interface.
5.5.2 Data storage
Under the main menu, press the “up button” or “down button” to select “Record”, then press the “up
button” or “down button” to enter the “Record Menu” interface as shown in Figure 11.
Press the “up button” or “down button” to select the option to be adjusted, then press the “left button” or
“right button” to change the value.
It indicates that the device is storing when the red dot “R●” in measurement interface ickers “Mode”:
record mode selection, including: “Auto” and “Manual” mode. Under “Manual” mode, select to turn on /
off memory by “Record”.
ENGLISH
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gima OXY 50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gima OXY 50 in the language / languages: English as an attachment in your email.

The manual is 1.06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gima OXY 50

Gima OXY 50 User Manual - French - 19 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info