Manual General Electric GFD49 (page 44 of 144) (English, French, Spanish)

646554

Zoom out

Zoom in

1/144

Problem Possible Causes What To Do

Clothes shrink Some fabrics will naturally

shrink when washed. Others

can be safely washed, but will

shrink in the dryer.

To avoid shrinkage, follow garment care labels exactly.

Some items may be pressed back into shape after drying.

If you are concerned about shrinkage in a particular

item, do not machine wash or tumble dry it.

Greasy spots on

clothes

Improper use of fabric softener Follow directions on fabric softener package.

Drying dirty items with clean

ones

Use your dryer to dry only clean items. Dirty items can stain clean items

and the dryer.

Clothes were not completely

clean

Sometimes stains which cannot be seen when the clothes are wet appear

after drying. Use proper washing procedures before drying.

Lint on clothes Lint filter is full Clean lint screen before each load.

Improper sorting Sort lint producers (like chenille) from lint collectors (like corduroy).

Static electricity can attract lint See suggestions in this section under Static occurs.

Overloading Separate large loads into smaller ones.

Paper, tissue, etc., left in

pockets

Empty all pockets before laundering clothes.

Static occurs No fabric softener was used Try a fabric softener.

Bounce

Fabric Conditioner Dryer Sheets have been approved for use in all

GE Appliances dryers when used in accordance with the manufacturer’s

instructions.

Overdrying Try a fabric softener.

Adjust setting to Less Dry or Damp.

Synthetics, permanent press

and blends can cause static

Try a fabric softener.

Collars and

waistbands still

wet at end of

cycle

The dryness monitor senses

that the body of the clothes is

dry

Choose Speed Dry or Time Dry to dry damp collars and waistbands. In the

future, when drying a load with collars and waistbands, choose More Dry.

Slight variation in

metallic color

This is normal Due to the metallic properties of paint used for this unique product,

slight variations of color may occur due to viewing angles and lighting

conditions.

Door is too foggy

to see clothes

during a steam

cycle

Steam condenses on inner door This is normal.

Water seen on

inside of door

and top of lint

filter when

opening door

after steam cycle

Steam condenses on these

surfaces

This is normal.

Small areas on

clothes are damp

after steam cycle

Steam condenses on inner

drum

If using the Steam Dewrinkle cycle, manually reduce the cycle time. If

using the Steam Refresh cycle, add more garments to the load.

Before you call for service…

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of General Electric GFD49 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 11,79 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

General Electric GFD49 Manual

Product: