646554
45
Zoom out
Zoom in
Previous page
1/144
Next page
Problem Possible Causes What To Do
Small amount of water
on floor in front of dryer
Inadequate load size for steam
cycle selected, excess steam
condenses inside cabinet and
leaks out
If using the Steam Dewrinkle cycle, manually reduce the cycle
time. If using the Steam Refresh cycle, add more garments to
the load.
Water on floor in back of
dryer
Loose water hose connection to
valve
Tighten connection.
Hose missing rubber washer at
connection with valve
Install rubber washer provided with hose.
Dryer makes water
noises
Water valve is open filling
steam generator
This is normal.
Steam generator is dispensing
steam into drum
This is normal.
Water drips from door
when opened after a
Steam Cycle
Steam condenses on inner door This is normal.
Cannot see steam at
beginning of cycle
Steam released at different
times in the cycle
This is normal.
Cannot see steam at any
time during cycle
The steam nozzle might be
clogged with debris from your
water supply
Call GE Appliances at 800.GE.CARES to order nozzle
replacement kit WE25M71 or to request a technician to replace
this for you.
Garments still wrinkled
after steam cycle
Too many garments Load fewer garments; manually increase time.
Dryer continues to
tumble after display says
Complete
Ext Tumble was selected Ensure Ext Tumble option is not selected. For the Steam
Refresh cycle, Ext Tumble will automatically be turned on and
cannot be turned off.
Before you call for service…
45
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for General Electric GFD49 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of General Electric GFD49 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 11,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info