479862
4
Zoom out
Zoom in
Previous page
1/9
Next page
ELECTRICAL CONNECTIONS
!
!
!
!
!
!
!
!
Implement the electrical engine blocks by working on the fuel pump and
the starter motor.
Connect the supply power positive of the 7590T alarm system to the
vehicle battery or to one of its derivations.
Connect the supply power negative of the 7590T alarm system to the
vehicle's metallic frame (all 2 BLACK wires marked M).
Connect ALWAYS one of the GREEN/BROWN wires of the alarm wiring
harness to the doors switch.
Connect (if necessary) the other GREEN/BROWN wire of the alarm wiring
harness to the doors switch.
Connect ALWAYS the BLACK wire marked V of the alarm wiring harness
to the bonnet switch.
Before programming the system, .
For the CDLconnections see at the diagram in the next pages.
The index reported below refers to the electrical scheme of alarm cable in the
next page.
Before effecting all electrical connections, disconnect the NEGATIVE
BATTERY POLE and connect again when mounting as terminated.
make all the electrical connection
NOTE: (available) diagrams for every specific car, must be required to
the zone dealer.
NOTE: The BLACK two pin connectors of the alarm wiring harness are
for the electronic key and led connections.
Negative
Positive
Engine immobilization 1
Engine immobilization 1
Positive under key
Door pin switches
Bonnet/boot switches
Positive alarm ON
External sensor input
Negative control for supplementary siren
Self powered siren
Turn signals
Negative output for electically controlled
boot opening
CDL (see diagram)
N°2
BLACK marked
BLACK marked
N°2 BLACK marked B
BLACK marked G
N°2
N°2 BLACK marked V
PINK
GREEN/BLACK
YELLOW/BLACK
BLUE
N°2 ORANGES
GREY-BLACK
YELLOW/BLUE RED/BLUE
YELLOW/BROWN RED/BROWN
YELLOW/GREY RED/GREY
BLACK marked M
R
N°2 H
GREEN/BROWN
FUNCTION WIRE COLOUR
ELECTRONIC KEY
YELLOW-GREY
BLACK marked G
+30
EARTH
EARTH
ORANGE
ORANGE
15A
+
Battery
12 VOLT
YELLOW-BLUE
YELLOW-BROWN
RED-GREY
RED-BROWN
RED-BLUE
WIRING DIAGRAM
ART.7590
Negative control for
supplementary siren
YELLOW-BLACK
GREY-BLACK
BLUE
Self-powered siren output
GREEN-BROWN
GREEN-BROWN
Doors push buttons
See locks diagrams
Engine immobilisation 1
Engine immobilisation 2
8A
MAX !
8A
MAX !
Positive to alarm
activated (700mA max.)
BLACK marked V
BLACK marked V
BLACK marked R
BLACK marked M
BLACK marked M
BLACK marked H
BLACK marked B
BLACK marked B
BLACK marked H
Bonnet push button
Boot push button
5A
5A
PINK
GREEN-BLACK
External sensors input
Negative output for electrically
controlled boot opening
Black
Green
Brown
TX
W
R
US calibration
Red
AERIAL. Do not tamper!
RX
Made in Italy
7590
ALARM SYSTEMS
Push-button 2
Push-button 1
Direction Indicator Ligths
Ignition Key
PAG . 6
PAG . 7
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gemini 7590T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gemini 7590T in the language / languages: English as an attachment in your email.

The manual is 0,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info