813416
29
Zoom out
Zoom in
Previous page
1/36
Next page
29
Servicing Instructions - Replacing Parts
5.10 Slide the 2 side panels up to the rear panel,
see Diagram 11.
11
Side Panels
6. Main Burner
To replace the main burner:
6.1 Remove the fuel effect from the burner.
6.2 Remove the burner securing screw from the left side of the
burner, see Diagram 12.
12
6.3 Slide the burner fully to the left.
6.4 Lift the right side clear of the pilot, see Diagram 13.
13
6.5 Slide the burner to the right and out of its location.
6.6 Ret in reverse order.
6.7 When relling the fuel effect ll to the level of the rim of the
burner tray and atten level.
TAKE CARE NOT TO SPILL THE EFFECT INTO THE
PILOT AREA.
STACK STONES EFFECT IN FRONT OF THE PILOT
SHIELD TO OBSCURE THE BLACK METAL SHIELD.
7. Main Control Assembly
7.1 To access the main control assembly rst remove:
— The decorative Steel frame (if tted)
— Window frame
— Main burner
— Splitter plate
7.2 To remove the splitter plater:
— Loosen the xing screws (one each side).
— Lift the front of the plate off the screws.
— Pull forward and upwards, see Diagram 14.
14
7.3 It is now possible to access all of the Main Control Assembly.
The control box is covered by a metal bracket, see
Diagram 15.
Remove the screw securing the bracket and lift off carefully.
15
7.4 Disconnect the two cables marked 'A' in Diagram 16.
16
B
AA
Control Valve
Control Box
7.5 Disconnect the battery extension lead, Diagram 16, B.
The control assembly can now be lifted up and removed.
7.6 Reassemble in reverse order.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gazco Vision Large MK2 Series Balanced Flue Instructions at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gazco Vision Large MK2 Series Balanced Flue Instructions in the language / languages: English as an attachment in your email.

The manual is 4.65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info