813412
40
Zoom out
Zoom in
Previous page
1/52
Next page
40
Servicing Instructions - Replacing Parts
Black Glass
NOTE: ALL FRONT PANELS ARE IN TWO PIECES.
HOLD THE REAR PANELS UNTIL ALL THE OTHER
PANELS ARE IN PLACE AS THEY CAN FALL
FORWARD.
5.8 Studio 2 only - The appliance is supplied with 2 sets of
lower side panels. The longer set is to be used with black
glass panels.
5.9 Place the lower side and front panels in position so the
chamfers meet at the front edge of the burner.
5.10 Ensure the 2-piece front panels are engaged against the
centre support tags on the burner and are pushed together
in the middle, see Diagram 10.
10
Front and Lower Side Panels
5.11 Fit and centralise the rear panel, see Diagram 11.
11
Rear Panel
5.12 Slide the 2 side panels up to the rear panel,
see Diagram 12.
12
Side Panels
6. Main Burner
To replace the main burner:
6.1 Remove the fuel effect from the burner (Stone/Glass Effect/
Vermiculite optional).
6.2 Remove the lining panels, see Section 5.
6.3 Remove the burner securing screw from the left side of
the burner, see Diagram 13.
13
6.4 Slide the burner fully to the left and lift the right side clear
of the pilot, see Diagram 14.
14
6.5 Slide the burner to the right and out of its location.
6.6 Refit in reverse order.
6.7 When refilling the fuel effect fill to the level of the rim of the
burner tray and flatten level.
TAKE CARE NOT TO SPILL THE EFFECT INTO THE
PILOT AREA.
STACK STONES/GLASS EFFECT IN FRONT OF THE
PILOT SHIELD TO OBSCURE THE BLACK METAL
SHIELD.
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gazco Studio Freestanding Balanced Flue at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gazco Studio Freestanding Balanced Flue in the language / languages: English as an attachment in your email.

The manual is 8.63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info