813412
16
Zoom out
Zoom in
Previous page
1/52
Next page
16
2. Installation of the Appliance
WARNING: THIS APPLIANCE IS HEAVY.
USE CAUTION WHEN INSTALLING, REMOVING
AND STORING AS THE APPLIANCE IS HEAVY AND
SHOULD BE HANDLED CAREFULLY.
AT LEAST TWO PEOPLE WILL BE REQUIRED TO
INSTALL THIS APPLIANCE.
There are two types of installation:
Bench Installation
Plinth Installation
The method of installation is the same for both types of
installation.
2.1 The following steps will need to be carried out prior to
positioning the appliance in its final position.
2.2 Position the flue collar onto the top of the appliance.
2.3 Remove the decorative front by lifting to disengage the
fixing hooks from the locating slots, see Diagram 1.
1
2.4 Place carefully to one side.
2.5 Remove the 4 screws to detach the back plate,
see Diagram 2.
2
Screws
2.6 Place carefully to one side.
1. Safety Precautions
1.1 For your own and other’s safety, you must install this stove
according to local and national codes of practice. Failure to
install the stove correctly could lead to prosecution. Read
these instructions before installing and using this
appliance.
1.2 These instructions must be left intact with the user.
1.3 Do not attempt to burn rubbish on this appliance.
1.4 Keep all plastic bags away from young children.
1.5 Do not place any object on or near to the appliance and
allow adequate clearance above the appliance.
IF THE APPLIANCE IS EXTINGUISHED OR GOES OUT
IN USE, WAIT 3 MINUTES BEFORE ATTEMPTING TO
RELIGHT THE APPLIANCE.
IMPORTANT: REFER TO DATA BADGE AND
TECHNICAL SPECIFICATION AT THE FRONT OF THE
MANUAL TO ENSURE THE APPLIANCE IS
CORRECTLY ADJUSTED FOR THE GAS TYPE AND
CATEGORY APPLICABLE IN THE COUNTRY OF USE.
FOR DETAILS OF CHANGING BETWEEN GAS TYPES
REFER TO SERVICING, SECTION 15, REPLACING
PARTS.
Unpacking
1.6 Remove the appliance from its packaging, and check that it
is complete and undamaged.
Put the loose ceramic parts to one side so that they are not
damaged during installation.
Installation Instructions
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gazco Studio Freestanding Balanced Flue at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gazco Studio Freestanding Balanced Flue in the language / languages: English as an attachment in your email.

The manual is 8.63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info