813412
13
Zoom out
Zoom in
Previous page
1/52
Next page
13
2. Flue Options
STUDIO 1 BF
1A
STUDIO 2 BF
1A
Start of bend to centre line of horizontal flue 170mm.
Centre line of vertical flue to end of bend 220mm.
2A. Top Flue Up and Out Kit
2.1 Vertical from the top of the appliance then horizontally out,
see Diagram 1A. The basic kit comprises:
STUDIO 1 BF (8534/8534AN)
1 x 200mm vertical length
1 x 500mm terminal length (cut to length on site)
1 x 90° elbow
1 x wall plate
1 x 70mm restrictor
1 x 60mm restrictor
STUDIO 2 BF (8509/8509AN)
1 x 200mm vertical length
1 x 500mm vertical length
1 x 500mm terminal length (cut to length on site)
1 x 90° elbow
1 x wall plate
1 x 75mm restrictor
The kit may be used on its own. (Note STUDIO 1 BF with
a 200mm rise only the 500mm terminal length can be used).
Extra lengths may be added to the vertical and horizontal
from the table, see Section 3.
2B. Top Flue Up and Out
with Additional Bend
2.2 An additional bend may be used on the horizontal section
(either 45° or 90°), but the overall horizontal flue run will be
reduced, see Diagram 1B.
Studio 1 & 2
When A = 1.0 to 1.499 metres B + C = 1.0 metres maximum
When A = 1.499 metres to 3.0 metres B + C = 4.0 metres maximum
1B
EITHER 45˚
OR 90˚
Installation Instructions
Site Requirements
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gazco Studio Freestanding Balanced Flue at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gazco Studio Freestanding Balanced Flue in the language / languages: English as an attachment in your email.

The manual is 8.63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info