Manual Gazco Studio Freestanding Balanced Flue (page 12 of 52) (English)

813412

Zoom out

Zoom in

1/52

Installation Instructions

1. Flue & Chimney Requirements

Note: This appliance must only be installed with the

flue supplied.

You must adhere to the following:

1.1 The flue must be sited in accordance with BS5440: Part 1

(latest edition), see Diagram 1.

1.2 Fit a guard to protect people from any terminal less than 2

metres above any access such as level ground, a balcony

or above a flat roof.

1.3 All vertical and horizontal flues must be securely fixed and

fire precautions followed in accordance with local and

national codes of practice.

1.4 A restrictor may be required, see Technical Specifications

on page 9.

1.5 Two types of flue terminals are available, horizontal and

vertical.

1.6 To measure for a horizontal terminal decide on the terminal

position.

1.7 Measure the height from the top of the appliance to the

centre of the required outlet.

1.8 For minimum and maximum flue dimensions see Diagram 1A.

1.9 Allow enough room either above or to the side of the

appliance to assemble the flue on top.

1.10 Assemble a horizontal flue in the following order:

— Vertical section

— 90° elbow

— Horizontal plus terminal

1.11 Support the opening of a masonry installation with a lintel.

1.12 Only the horizontal terminal section can be reduced in size.

Site Requirements

UK Dimensions

Dimension Terminal Position Minimum

Distance

A* Directly below an opening 600mm

B* Above an opening 300mm

C* Horizontally next to an opening 400mm

D Below gutters, soil pipes or drain pipe 300mm

E Below eaves 300mm

F Below balcony or car port roof 600mm

G From a vertical drain pipe or soil pipe 300mm

H From an internal or external corner or to a

boundary alongside the terminal

600mm

I Above ground, roof or balcony level 300mm

Dimension Terminal Position Minimum

Distance

J From a surface or boundary facing the

terminal

600mm

K From a terminal facing the terminal 600mm

LFrom an opening in the car port (e.g. door,

window) into the dwelling

1200mm

M Vertically from a terminal on the same wall 1200mm

NHorizontally from a terminal on the same

wall

300mm

P From a structure on the roof 600mm

Q Above the highest point of intersection with

the roof

300mm

* In addition, the terminal should not be nearer than 300mm to an opening in the building fabric formed for the purpose of accommodating a built-in element such as a window frame.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gazco Studio Freestanding Balanced Flue in the language / languages: English as an attachment in your email.

The manual is 8.63 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gazco Studio Freestanding Balanced Flue Manual

Product: