Manual Gazco Steel Manhattan Balanced Log (page 28 of 36) (English)

813399

Zoom out

Zoom in

1/36

3.4 To replace the burner, engage the venturi over the injector

ensuring the burner sits on top of the fixing bracket. Push

the burner to the right and whilst holding, insert the three

fixing screws.

NOTE: BEFORE REPLACING THE BURNER, ENSURE

THE SILICONE SEAL AROUND THE INJECTOR IS

INTACT AND CHECK THAT VENTURI COVER IS

ATTACHED.

4. Pilot Unit

The pilot assembly consists of five components, which can

be individually changed, these are:

4a) Pilot burner bracket.

4b) Pilot injector.

4c) Electrode.

4d) Thermocouple.

4e) Gasket.

4.1 Turn the gas supply off at the isolation device, remove the

door and place to one side, carefully remove the ceramic

fuel bed components.

4.2 Remove the main burner, see Section 3.

4.3 Remove the thermocouple baffle taking note of how it is

positioned. See Diagram 5.

4a. Pilot Burner Bracket

4.4 Remove the 2 fixing screws from the pilot bracket, see

Diagram 6. Gently draw the assemble away from the firebox

to give access to the nuts and ignition lead.

NOTE: TAKE CARE NOT TO DAMAGE THE GASKET.

Servicing Instructions - Replacing Parts

4b. Pilot Injector

4.5 Undo the compression nut on the pilot feed pipe and

withdraw the injector which will be hooked onto the olive.

When replacing an injector always make sure it is hooked

onto the olive before inserting it into the pilot burner, see

Diagram 7.

4c. Electrode

4.6 Disconnect the ignition lead and undo the retaining nut. The

electrode can now be removed, note the orientation of the

electrode terminal when reassembling, see Diagram 8.

4d. Thermocouple

4.7 Undo the retaining nut and withdraw the thermocouple,

see Diagram 9.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gazco Steel Manhattan Balanced Log in the language / languages: English as an attachment in your email.

The manual is 2.45 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gazco Steel Manhattan Balanced Log Manual

Product: