Manual Gazco Steel Manhattan Balanced Log (page 27 of 36) (English)

813399

Zoom out

Zoom in

1/36

1. General

1.1 All main components can be replaced without removing the

appliance from its installation.

1.2 Ensure the appliance and surrounds are cool before

servicing.

IT IS ESSENTIAL THAT THE GAS SUPPLY TO THE

APPLIANCE IS TURNED OFF AT THE ISOLATION

DEVICE BEFORE PROCEEDING FURTHER.

1.3 If, for any reason, the flue has to be removed from the

appliance, the seals must be replaced.

2. Removing the Door

It will be necessary to remove the glass frame in order to

access most components.

IMPORTANT: THE OUTER PANELLING AND

DECORATIVE TRIM OF THE APPLIANCE ARE MADE

FROM STEEL. TAKE CARE WHEN INSTALLING,

REMOVING AND STORING TO AVOID DAMAGING

THE OUTER CASING, HEARTH OR DOOR.

THE GLASS FRAME IS FRAGILE. TAKE CARE WHEN

HANDLING TO AVOID DAMAGE.

2.1 To remove the glass frame lift off the decorative steel trim,

see Diagram 1.

2.2 Remove the screws holding the glass frame, see Diagram 8.

Take care to support the glass when removing the screws.

2.3 Remove the glass frame and place carefully to one side.

2.4 Refit in reverse order.

2.5 Ensure that the rope seal on the back of the glass frame is

intact. Replace the glass frame and tighten the 6 screws

evenly, see Diagram 2. DO NOT OVERTIGHTEN.

2.6 Offer the decorative steel trim to the opening, inserting the 2

tags on the bottom of the trim behind the bottom panel. Lift

the top of the trim up and hook the lugs on the back of the

trim over the top of the glass frame, see Diagram 3.

NEVER OPERATE THE APPLIANCE WHEN THE GLASS

FRAME IS REMOVED, OR THE GLASS IS BROKEN.

2.7 Replace ALL of the securing screws ensuring that a screw is

present in all fixing slots.

UNDER NO CIRCUMSTANCES SHOULD THE

APPLIANCE BE USED IF ANY OF THE FRAME

RETAINING SCREWS ARE LOOSE OR MISSING.

3. Main Burner

3.1 Turn the gas supply off at the isolation device, remove the

door and place to one side, carefully remove the ceramic

fuel bed components.

3.2 Remove the 3 securing screws, 2 at the rear and 1 at the

front left hand side, see Diagram 4.

3.3 Raise the left hand side of the burner to clear the bracket,

draw the left hand side forward.

The burner venturi is engaged over the injector. When

removing the burner be sure to clear the injector, this will

release the right hand side of the burner.

Take care when removing the burner so as not to

damage the pilot burner.

Servicing Instructions - Replacing Parts

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gazco Steel Manhattan Balanced Log in the language / languages: English as an attachment in your email.

The manual is 2.45 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gazco Steel Manhattan Balanced Log Manual

Product: