813418
30
Zoom out
Zoom in
Previous page
1/36
Next page
30
SERVICING INSTRUCTIONS
REPLACING PARTS
19
AR1874
A
B
9.5 Thermocouple
Disconnect the thermocouple from the gas valve/interrupter,
Diagram 19, Arrow B.
Undo the thermocouple nut in the back of the pilot bracket
half a turn. This releases the thermocouple.
When replacing with a new thermocouple, take care to
bend the new component to the same shape as the
thermocouple just removed.
To refit the thermocouple into the pilot bracket, ensure it is
pushed fully into the hole. There is a stop on the
thermocouple to set the height.
Lock the retaining nut just enough to grip the
thermocouple.
Connect the thermocouple to the valve/interrupter and
take care not to over-tighten.
10. IGNITION LEAD
20
AR1872
10.1 To replace the ignition lead:
Release the Main Control Assembly and tilt backwards, see
Section 8 above.
Remove the ignition lead from the control box, Diagram
20.
Remove the ignition lead from the electrode, Diagram 20.
Note the direction of the lead. The new lead must follow
exactly the same route.
NOTE: THE IGNITION LEAD MUST NOT PASS IN
FRONT OF THE CONTROL BOX AS THIS CAN DAMAGE
THE SENSITIVE ELECTRONICS.
11. GAS VALVE
11.1 To change the gas valve:
Remove the control assembly, Section 8
Release the gas inlet pipe, Diagram 21, Arrow A
Remove the thermocouple from the interrupter block and
release the second thermo current cables.
Release the pilot pipe, Diagram 21, B.
Release the injector feed pipe, Diagram 19, C.
Remove the wire cable, Diagram 21, D.
Remove the two screws.
The valve can now be freed.
21
AR1873
B
A
C
D
12. MAGNETIC SAFETY VALVE
12.1 To replace the magnetic safety valve:
Undo the thermocouple from the interrupter block and
remove the two thermo current cables.
Unscrew the interrupter block from the back of the valve.
Undo the silver magnetic valve retaining but on the backof
the valve.
Gently tap out the mag valve.
Replace with a new unit.
Reassemble in reverse order.
13. CONTROL BOX
Remove the two thermo current cables by removing the
two screws, Diagram 22.
Remove the ignition lead, Diagram 22.
Remove the eight loom wire from the control box,
Diagram 22.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gazco RIVA VISION LARGE 8000 series Balanced Flue at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gazco RIVA VISION LARGE 8000 series Balanced Flue in the language / languages: English as an attachment in your email.

The manual is 1.05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info