813418

Gazco RIVA VISION LARGE 8000 series Balanced Flue Manual

31
Zoom out
Zoom in
Previous page
1/36
Next page
31
SERVICING INSTRUCTIONS
REPLACING PARTS
22
AR1915
Touch pad
extension
cable
Battery
extension
cable
Eight wire
cable
Thermo current
cables
Ignition lead
Remove the battery extension cable, Diagram 23.
Remove the touch pad extension cable.
The control box can now be replaced.
After replacing the control box you may need to reprogram
the handset:
Press and hold the reset button on the control box until
you hear two signals. After the second longer signal:
Release the reset button and within 20
seconds.
Press the DOWN button on the handset until
you hear an additional long signal
confirming the new code
14. MAIN INJECTOR
14.1 To change the main injector:
Undo the injector fee pipe.
Undo the lock nut from the injector.
Replace with the correct size injector.
15. PRIMARY AERATION PLATE
NOT ALL MODELS HAVE AERATION PLATES. REFER TO
NOTE AT BEGINNING OF INSTALLATION
INSTRUCTIONS.
15.1 Remove the burner module as described in Servicing
section 7.
15.2 Remove the fixing screw and slide the plate off the venturi.
15.3 Replace with the correct size plate and secure with the
screw. Ensure the lower edge of the plate is located over
the venturi flange, Diagram 23.
23
AR0766
16. CHANGING BETWEEN GAS TYPES
In order to change between gas types, it will be necessary to
change the following items:
Burner Unit
Pilot Injector
Control Valve
Injector
Aeration Plate (if required)
Data badge
A kit of parts is available for this, always quote the Model
number and Serial number when ordering any spare parts.
NOTE: THE CONTROL VALVE IS FACTORY PRESET FOR
THE CORRECT GAS TYPE AND MODEL, A NEW UNIT
WILL NEED TO BE ORDERED WHEN CHANGING
BETWEEN GAS TYPES.
17. PRESSURE AND LEAK TESTING THE
APPLIANCE
17.1 Follow Section 8, Main Control Assembly, 8.1 and 8.2
Access to the pressure test point can now be reached,
Diagram 24.
24
AR1888
… 31 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gazco RIVA VISION LARGE 8000 series Balanced Flue at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gazco RIVA VISION LARGE 8000 series Balanced Flue in the language / languages: English as an attachment in your email.

The manual is 1.05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info