813405
32
Zoom out
Zoom in
Previous page
1/40
Next page
32
1. GENERAL - BALANCED FLUE
1.1 All principal components can be replaced without removing
the appliance from its installation, although it is essential
that the gas supply to the appliance is turned off at the
isolation device before proceeding further.
1.2 If for any reason the flue has to be removed from the
appliance, the seal must be replaced in the inner spigot.
2. MAIN BURNER
2.1 Turn the gas supply off at the isolation device, remove the
decorative frame (see Diagram 1).
1
AR1824 AR1918
2.2 Remove the glass frame see Diagram 2.
2
AR0816
2.3 Remove the ceramic logs and the granules.
2.4 Carefully slide the ceramic sides forward and store safely.
See Diagram 3.
SERVICING INSTRUCTIONS
REPLACING PARTS - BALANCED FLUE
3
AR0759
2.5 Remove the screws from the log support. The inlet pipe nut
is now visible between the burner and the angled base of
the firebox (see Diagram 4, arrow A).
4
AR0818
2.6 Undo the inlet pipe nut and the four screws holding the
burner to the tray (see Diagram 4, arrow B). The burner,
complete with the inlet pipe, can now be removed.
2.7 To replace the burner, locate the inlet pipe onto the brass
fitting and loosely fit the nut. DO NOT TIGHTEN THE NUT
AT THIS STAGE. Replace the four burner fixing screws,
tighten the inlet pipe nut.
2.8 Light the appliance and check for leaks.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gazco Riva F67 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gazco Riva F67 in the language / languages: English as an attachment in your email.

The manual is 4.73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info