813405
28
Zoom out
Zoom in
Previous page
1/40
Next page
28
SERVICING INSTRUCTIONS
REPLACING PARTS - CONVENTIONAL FLUE
6
AR0760
3. MAIN BURNER
3.1 With the module removed (see Servicing Instructions,
Replacing Parts, Section 2) undo the injector nut. Remove
the thermocouple from the rear of the gas valve.
3.2 Remove the pilot pipe from the pilot unit and the gas valve
(see Diagram 7). Pull the ignition lead off the electrode.
Turn the module over and remove the four screws (see
Diagram 8). The burner can now be removed.
7
AR1484
8
AR0767
3.3 To replace the burner, align the injector with the feed pipe
and loosely attach the nut. Replace the four screws and
tighten the injector nut. Replace the thermocouple, pilot
pipe and ignition lead.
3.4 When replacing the module ensure the thermocouple, feed
pipe and pilot pipe engage in the divider plate slot (see
Diagram 9). Check for leaks.
9
AR0760
4. PILOT UNIT
4.1 Undo the compression nut on the pilot burner then undo
the thermocouple at the rear of the gas valve. Carefully cut
the cable ties holding the thermocouple to the pilot pipe.
Remove the HT lead from the electrode, undo the two
retaining screws and remove the pilot (see Diagram 10).
10
AR0761
4.2 When replacing the pilot ensure the thermocouple follows
its original route, i.e. along the pilot pipe. Attach the
thermocouple to the pipe with new cable ties.
4.3 Set the spark gap (see Diagram 11).
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gazco Riva F67 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gazco Riva F67 in the language / languages: English as an attachment in your email.

The manual is 4.73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info