813407
21
Zoom out
Zoom in
Previous page
1/40
Next page
21
Installation Instructions
7. Removal & Fitting of the Liners
7.1 The appliance comes with 3 optional liner finishes:
Vermiculite
Black Reeded
Brick Effect
Black Glass - see separate instructions PR2214 for details.
7.2 To fit the desired liner type remove the retaining bracket at
the top rear of the firebox, see Diagram 16.
16
Retaining Bracket
Screws
7.3 Slide the back liner panel over the bracket in the base of the
firebox and stand upright against the back of the appliance,
see Diagram 17.
17
Bracket Liner
7.4 Replace the top retaining bracket to hold the back panel in
place.
7.5 Slide the 2 side liners into place between the side of the
firebox and the burner tray, see Diagram 18.
18
7.6 Removal of the liners is the reverse of this process.
8. Arrangement Of Fuel Bed Components
8.1 The logs for the fuel bed are clearly individually labelled,
see Diagram 19.
19
AB
CDE
F
8.2 Place log A on the left hand front of the burner. The log will
rest in a groove and the raised stud will fit in the cut out
notch in the log, see Diagram 20.
Ensure the log is pushed as far to the side of the
appliance as the grooves will allow.
20
8.3 Place log F behind the first log and locate the rear of the log
on the metal bracket. The log should rest between the lip of
the bracket and the rear liner, see Diagram 21.
29
21
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gazco Riva 2 F670 Conventional Flue at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gazco Riva 2 F670 Conventional Flue in the language / languages: English as an attachment in your email.

The manual is 4.52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info