813407
20
Zoom out
Zoom in
Previous page
1/40
Next page
20
Installation Instructions
5.8 Locate the Apex stand over the fixing screws and slide
backwards to lock into position. The stand should feel
secure on the fixing screws.
If the Apex stand will not fit onto the fixing screws or if
there is excess movement, remove the stand and adjust
the height of the screws. Reposition the stand and check
the fit. The stand should feel secure on the fixing screws.
5.9 Position the appliance on the stand lining up the holes in its
base with the studs on the top of the Apex stand, see
Diagram 12.
12
5.10 Secure the appliance with the 2 nuts supplied, see
Diagram 13.
13
Nuts
5.11 Connect the gas supply to the gas Inlet pipe at the back of
the appliance.
5.12 Position the flue collar onto the top of the appliance,
see Diagram 14.
14
5.13 Connect the flue system.
6. Gas Soundness Pressure Check
6.1 PURGE THE SUPPLY PIPE. This is essential to expel any
debris that may block the gas controls. Connect the elbow
to the appliance inlet pipe, see Diagram 15.
Elbow
15
6.2 Connect a suitable pressure gauge to the test point located
on the inlet fitting and turn the gas supply on. Light the
appliance and check all gas joints for possible leaks. Turn
the appliance to maximum and check that the supply
pressure is as stated on the databadge. Turn the gas off
and replace the test point screw, turn the gas on and check
the test point for leaks.
Advice on handling and disposal
of fire ceramics
The side panels in this appliance are made from
Refractory Ceramic Fibre (RCF), a material which
is commonly used for this application.
Protective clothing is not required when handling
these articles, but we recommend you follow
normal hygiene rules of not smoking, eating or
drinking in the work area and always wash your
hands before eating or drinking.
To ensure that the release of RCF fibres are kept
to a minimum, during installation and servicing a
HEPA filtered vacuum is recommended to remove
any dust accumulated in and around the
appliance before and after working on it. When
servicing the appliance it is recommended that
the replaced items are not broken up, but are
sealed within heavy duty polythene bags and
labelled as RCF waste.
RCF waste is classed as stable, non-reactive
hazardous waste and may be disposed of at a
licensed landfill site.
Excessive exposure to these materials may
cause temporary irritation to eyes, skin and
respiratory tract; wash hands thoroughly after
handling the material.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gazco Riva 2 F670 Conventional Flue at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gazco Riva 2 F670 Conventional Flue in the language / languages: English as an attachment in your email.

The manual is 4.52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info