813396

Gazco F40 Avanti Conventional Coal Manual

17
Zoom out
Zoom in
Previous page
1/23
Next page
5
AR1444
3.4 Undo the compression nut on the pilot unit, disconnect the
ignition lead from the electrode by pulling gently down on
the wire. Undo the two screws and the pilot unit can be
removed. See diagram 6
6
AR1445
3.5 Reassemble in reverse order, check for gas leaks.
4. IGNITION LEAD
4.1 Follow steps 2.1 to 2.5 to remove the burner unit, making
sure that the gas supply is isolated at the isolation point.
4.2 Cut the cable tie, gently pull the lead out from the electrode
and the control unit.
4.3 Reassemble in reverse order, check for gas leaks. Take care
not to route the ignition lead too close to other electrical
leads.
5. AERATION PLATE
5.1 Follow steps 2.1 to 2.5 above to remove the burner unit,
making sure the gas supply is isolated at the isolation point.
Turn the burner unit over, the aeration plate is accessible
from below.
5.2 Undo the M5 nyloc nut, and remove the aeration plate. See
diagram 7
5.3 Reassemble in reverse order with the correct aeration plate.
Check for gas leaks.
7
AR1441
6. MAGNETIC SAFETY VALVE
6.1 Follow steps 2.1 to 2.5 above, making sure the gas supply is
isolated at the isolation point. Turn the burner unit over and
disconnect the thermocouple lead. See diagram 8
8
AR2013
6.2 Unscrew the interrupter block (A). Support the valve and
undo the magnetic valve retaining nut (B). See diagram 9
6.3 Remove the magnetic valve unit located inside. Reassemble
in reverse order. Check for gas leaks.
9
AR2015
17
SERVICING INSTRUCTIONS
REPLACING PARTS
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gazco F40 Avanti Conventional Coal at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gazco F40 Avanti Conventional Coal in the language / languages: English as an attachment in your email.

The manual is 3.44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info