813396

Gazco F40 Avanti Conventional Coal Manual

16
Zoom out
Zoom in
Previous page
1/23
Next page
1. GENERAL
1.1 All principle components can be replaced without removing
the appliance from its installation, although it is essential
that the gas supply to the appliance is turned off at the
isolation device before proceeding further.
1.2 ENSURE THAT THE APPLIANCE IS COLD BEFORE
COMENCING WORK ON IT.
1.3 Remove the batteries from the battery box.
1.4 If access to the components is restricted the burner and
control system is a self contained unit and can be removed
as a single unit for easy maintenance.
2. MAIN BURNER
2.1 Remove the door from the stove, open the lower door, and
remove the lower panel. Remove the batteries from the
battery box, undo the six pozidriv screws and remove the
glass frame. See diagram 1
1
AR1454
2.2 Carefully remove the ceramic components from the stove
and store safely. Remove the cover panel
2.4 Undo the gas connection at the pressure test point, and
undo the two screws at the back of the firebox. See diagram
2
2
AR1457
2.5 Carefully pull the burner unit forward until access to the
rear of the valve is possible. Undo the thermocouple lead
and remove the TTB wires. See diagram 3
3
AR2013
2.6 The burner unit can now be removed to work on.
2.7 Reassemble in the reverse order, check for gas leaks. When
connecting the TTB wires in the back of the valve, it is
essential for the wire with the red highlight be closest the
valve. Note also, that the connectors for the TTB in the
control unit are different sizes.
3. PILOT UNIT
3.1 Follow the steps 2.1 to 2.5 above, making sure that the gas
supply is isolated at the isolation point.
3.2 With the burner unit removed, undo the two screws and
remove the front aeration guide. See diagram 4
4
AR1443
3.3 Remove the lint arrestor by folding the tabs back. See
diagram 5.
16
SERVICING INSTRUCTIONS
REPLACING PARTS
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gazco F40 Avanti Conventional Coal at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gazco F40 Avanti Conventional Coal in the language / languages: English as an attachment in your email.

The manual is 3.44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info