813396

Gazco F40 Avanti Conventional Coal Manual

11
Zoom out
Zoom in
Previous page
1/23
Next page
3
AR2013
3.6 Remove the four black screws in the firebox and lift the
firebox clear. See diagram 4.
4
AR14740
3.7 For Midi and Highline versions of the F40, it will be
necessary to remove the base panel. This lifts up and
through the upper part of the carcass. See diagram 5.
5
AR1471
3.8 It will now be possible to access the two tabs for bolting the
appliance down (if required). Position the stove ensuring all
appropriate clearances are observed. Using a pencil mark
the position of the holes in the fixing bracket. See diagram
6.
6
AR1456
3.9 Remove the stove and drill the holes using a masonary drill.
Insert the rawlplugs.
3.10 Reposition the stove and level it using the three levelling
bolts in the base. Screw the stove down. Replace the
decorative base cover panel if fitted.
3.11 Refit the fire box and burner unit to the stove
Reconnect the TTB electrical connector, Diagram 7.
7
AR2013
3.12 Having run the gas supply to the stove, PURGE THE
SUPPLY, this is essential to expel any debris that may block
the controls. Connect the gas supply to the 8mm test point
located at the lower right hand side of the stove. A gas
soundness check must be completed up to the gas inlet
connection. See diagram 8.
8
AR2014
3.13 Check the pull of the flue system by applying a lighted
smoke pellet to the flue system opening. If there is a
11
INSTALLATION INSTRUCTIONS
INSTALLATION
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gazco F40 Avanti Conventional Coal at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gazco F40 Avanti Conventional Coal in the language / languages: English as an attachment in your email.

The manual is 3.44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info