813395

Gazco F40 Avanti Balanced Log Manual

28
Zoom out
Zoom in
Previous page
1/32
Next page
28
4. IGNITION LEAD
With the firebox clear of the carcass it is possible to access
the back of the pilot assembly.
4.1 Disconnect the ignition lead from the electrode.
7
AR0916
4.2 Undo the single screw that secures the left hand side of the
control cover (see diagram 7).
4.3 To release the right hand side of the control cover insert the
narrow blade screwdriver into the slot shown in diagram 8.
Lever it gently and pull from the right hand side at the same
time. The cover will now come off, there is a small
cylindrical metal spacer inside the cover, this must be kept
and replaced on the fixing screw during reassembly.
4.4 Disconnect the end of the ignition lead from the valve
body, see diagram 8. Note the existing route of the ignition
lead.
8
AR2017
Ignition
lead
4.5 Replace with a new ignition lead following the same route
as the old one.
4.6 Replace the valve cover and the pilot assembly.
4.7 Check the operation of the new ignition lead.
5. PIEZO
5.1 The piezo assembly used on this stove is not serviceable
and is not likely to fail.
6. GAS VALVE
6.1 With the firebox clear of the carcass it is possible to access
to the control valve located on the bottom of the firebox.
6.2 Disconnect the 2 x 8mm and 1 x 4mm gas pipe fittings at
the back of the gas valve and also disconnect the
thermocouple, see diagram 9, arrow A.
6.3 Remove the control valve cover and disconnect the ignition
lead from the gas valve, see section 4.
6.4 Undo the two bolts securing the gas valve to the appliance
and remove the valve, see diagram 9, arrow C.
6.5 Replace in reverse order.
6.6 Check all joints for gas leaks, check the operation of the
thermocouple and ignition lead.
9
AR2017
Pilot Thermocouple
Injector
Ignition lead
Gas valve
7. MAGNETIC SAFETY VALVE
7.1 To take out the magnetic safety valve remove the
thermocouple lead from the valve.
7.2 Supporting the valve, unscrew the magnetic valve
retaining nut and gently remove the safety valve.
7.3 Replace with a new unit.
7.4 Replace and tighten the retaining nut and thermocouple.
7.5 Carry out a leak test to ensure retaining nut is sealed.
SERVICING INSTRUCTIONS
REPLACING PARTS
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gazco F40 Avanti Balanced Log at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gazco F40 Avanti Balanced Log in the language / languages: English as an attachment in your email.

The manual is 3.87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info