813395
17
Zoom out
Zoom in
Previous page
1/32
Next page
3.30 File the cut edges smooth.
Terminal
On the outside wall:
3.31 Position the flue assembly into the hole. The terminal
should be flat against the wall.
3.32 Make sure the terminal is vertical (see Diagram 3).
3.33 Mark the four fixing holes.
3.34 Remove the terminal to drill the holes.
3.35 Insert wall plugs supplied.
DO NOT FIX THE FLUE AT THIS STAGE.
Flue and Stove Fixings
3.36 Position the stove observing appropriate clearances.
3.37 Apply a bead of suitable weatherproof sealant (silicone or
similar) to perimeter of back face of terminal (see
Diagram 8, A).
AR0606
8A
3.38 Feed the flue through the wall, making sure it runs
smoothly.
On the inside wall:
3.39 Engage the flue in the inner and outer spigots.
3.40 Make sure rubber seals on the spigots are not damaged
From outside:
3.41 Insert four screws in the flanges of the flue terminal.
3.42 Check sealant has formed a water-tight joint to the wall.
17
INSTALLATION INSTRUCTIONS
INSTALLATION
3.22 Mark the height from the top of the hearth to the centre
of the flue (see Diagram 6, B).
AR0605
6
A
B
TAKE CARE TO MARK OUT THE FLUE CORRECTLY. IT IS
DIFFICULT TO MOVE AFTER INSTALLATION.
Flue Aperture
3.23 Create a 152mm (6”) diameter hole for the flue using
either:
a) a core drill, or
b) a hammer and chisel
3.24 Make good at both ends of the hole.
Flue Length
3.25 Measure the total wall thickness and add 65mm.
3.26 The total flue length gives a minimum clearance of 50mm
between the rear of the stove and the wall.
3.27 Insert the square cardboard sleeve into the flue to support
the inner tube.
3.28 Cut through the flue and sleeve (see Diagram 7).
AR0630a
7
3.29 REMOVE THE CARDBOARD REMNANTS FROM THE
FLUE.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gazco F40 Avanti Balanced Log at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gazco F40 Avanti Balanced Log in the language / languages: English as an attachment in your email.

The manual is 3.87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info