512657
44
Zoom out
Zoom in
Previous page
1/56
Next page
44
MINCING AND MIXING
WARNING: DO NOT insert your hands or any foreign object (e.g. cooking utensils)
in the feed tube or outlet of the cutter housing, with the appliance connected to the power
supply.
Remove any hard parts of the foods carefully to avoid hazards arising from splinters and/
or damage to the moving parts of the appliance. If you failed to see residues of bones,
seeds, shells or stalks during preparation of the ingredients, splinters could squirt out of
the feed tube. Thus, do not hold your face over the feed tube, while the appliance is in
operation.
Do not process frozen foods.
1. Prepare the foods for processing. Remove bones, gristle and sinews as much as
possible. Cut meat into strips (about 10 cm length and 2 cm thick (see: Tips for Best
Results).
Assemble the mincer according to the instructions above (see: Assembling the Appli-
ance Place a sufficiently large bowl or dish under the outlet of the cutter housing).
2. Put the meat on the tray. Connect the appliance to the power supply and switch the
power switch on. The indicators of the buttons on top of the motor housing are illu-
minated white.
WARNING: Do not push the food with your hands or any cooking utensils in the feed
tube. Always use the provided pusher. Do not let the motor work continuously for more
than 3 minutes. Switch OFF and let the motor cool down for 15 minutes in between
times, if you wish to process larger amounts of food.
3. Press the ON/OFF button to switch on the motor. Then use the pusher to push the
meat into the feed tube and gently push down without violence.
4. As soon as you finished your work, switch OFF the appliance (ON/OFF switch and
power switch). Then unplug the appliance.
Tip:
You can remove some residues of meat in the cutter housing by processing a slice of
bread.
5. Clean the appliance according to the instructions in section Care and Cleaning.
Always clean the appliance immediately after operation. Do not leave any food dry
on the appliance.
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gastroback 41408 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gastroback 41408 in the language / languages: English, German as an attachment in your email.

The manual is 0,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gastroback 41408

Gastroback 41408 Manual - German - 2 pages

Gastroback 41408 User Manual - German - 25 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info