512657
43
Zoom out
Zoom in
Previous page
1/56
Next page
43
Preparing Cookies
Use the separator disc, cookie maker and former.
Place the separator disc over the worm shaft. The separator disc settles into the cutter
housing only in one way. Thus, ensure that the notch in the brim at one side of the sepa-
rator disc fits onto the protrusion of the cutter housing.
Then place the cookie maker on the separator disc. The notch in the brim of the cookie
maker must fit into the protrusion on the brim of the separator disc.
Tip:
The former is installed later on.
4. Place the screw ring on the cutter housing, and screw the screw ring clockwise on
the cutter housing, but do not fasten it.
5. Connect the cutter housing to the motor housing.
For this, hold the feed tube pointing to the right (about 45°), and in this orientation insert
the opening of the cutter housing with the cogwheel of the worm shaft into the gear hole
of the motor housing. For this, turn the cutter housing slightly, until it settles in the gear
hole. Do not use violence! If you cannot insert the cutter housing correctly, simply loosen
the screw ring a little, and try again.
Then turn the cutter housing counter clockwise until the feed tube points up vertically and
the cutter housing engages with a click. Ensure that the cutter housing is assembled tightly
and will not wobble or fall out.
6. Screw the screw ring hand-tight without violence.
7. When using the cookie maker, insert the former in the cookie maker. For this, pos-
sibly you must turn the screw ring backwards a little.
Tip:
With the former in place, the screw ring cannot loosen during operation.
CAUTION: Do not use any tools for fastening the screw ring to avoid damage to the
thread.
8. Place the tray with its outlet on the top of the feed tube and press the tray gently
downwards. Ensure that the tray is tightly in place and will not fall or wobble.
Now, the appliance is ready for use.
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gastroback 41408 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gastroback 41408 in the language / languages: English, German as an attachment in your email.

The manual is 0,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gastroback 41408

Gastroback 41408 Manual - German - 2 pages

Gastroback 41408 User Manual - German - 25 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info