714687
42
Zoom out
Zoom in
Previous page
1/48
Next page
42
Problem Reason The Solution
The motor agitates
with unusual noises or
gets hot
AND/OR
the cutting assembly is
rotating too slowly.
The motor has been operating con-
tinuously for too long.
Immediately release the ON/OFF button
to switch off the motor. Ensure to let the
motor operate continuously for no more than
10 seconds. Make a break of at least 15
minutes.
The food in the glass container is
too hard or too tough,
OR
There is too much food in the glass
container.
Immediately release the ON/OFF button and
unplug the appliance. Remove some food
from the glass container. Process your food
in smaller portions. Make a break of at least
15 minutes.
Liquid or foam is
escaping from under
the motor unit.
Too much food in the glass con-
tainer.
Immediately release the ON/OFF button and
unplug the appliance. Observe the maximum
filling amounts (liquids: 400 ml; frothing
food: 200 ml). Clean the motor unit and lea-
ve the motor unit dry for at least 1 day (see:
‘Care and Cleaning’).
Liquid is running out
between the lid and
glass container.
Too much food in the glass con-
tainer.
Take some food out of the glass container.
When processing liquids or very runny ingre-
dients, the maximum amount is 400 ml.
The lid seal is missing or not instal-
led correctly.
Ensure to install the lid seal correctly at the
brim of the lid.
The lid seal or lid is damaged. Replace the lid seal or lid. Call the Gastroback
Service Center or your vendor.
CARE AND CLEANING
WARNING: Always unplug the appliance, before cleaning. The blades of the
cutting assembly are very sharp! Always handle the cutting assembly with special
caution to avoid injuries and damage. Do not touch the blades with your fingers.
Ensure that no one will touch the blades unintentionally. Do not hold your hands
or any foreign objects into the coupling of the motor unit with the appliance still con-
nected to the power supply. Always ensure that all parts of the appliance are out
of reach of young children.
Do not use abrasive cleaning agents or aggressive liquids (e.g. bleach, solving
agents) for cleaning the appliance or any part of it, to avoid damage to the surfaces.
Do not use any hard or sharp-edged objects for cleaning (e.g. scoring pads, knives,
scrapers). Do not place or immerse the motor unit or the power cord in water or any
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gastroback 40961 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gastroback 40961 in the language / languages: English, German as an attachment in your email.

The manual is 0,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info