714687

Gastroback 40961 Manual

43
Zoom out
Zoom in
Previous page
1/48
Next page
43
other liquid. Do not spill or drip any liquids on or in the motor unit or power cord to
avoid risk of fire and electric shock.
DO NOT clean the motor unit or power cord in an automatic dishwasher! Do not
use violence.
Glass container, lid, cutting assembly including the removable pairs of blades, lid
seal, and the non-slip silicone ring may be cleaned in an automatic dishwasher.
If possible, place these parts onto the top rack for cleaning. Ensure that the glass
container will not knock against other utensils during the cleaning cycle to avoid
damage.
In general, you should avoid leaving any food dry on the parts of the appliance
after processing.
DISASSEMBLING THE APPLIANCE
1. Always unplug the appliance after processing your food and before cleaning.
2. Remove the motor unit and lid.
3. You may remove the lid seal from the lid for cleaning. For this, carefully pull the
lid seal out of its groove.
WARNING - RISK OF INJURIES: Do not touch the blades of the cutting
assembly with your fingers to avoid injuries. For disassembling the cutting assembly,
always use the dedicated disassembling tool. Strictly observe the following instructions.
4. Grasp the upper plastic end of the blade shaft and pull the cutting assembly
out of the glass container, ensuring not to touch the blades with your hands. To
remove coarse residues of food, shortly rinse the cutting assembly under running
tap water.
5. If you had used the middle and/or upper pair of blades, you may remove these
pairs of blades for cleaning. Only the lower pair of blades is integrated in the
blade shaft. However, use special care, when handling any part of the cutting
assembly as the blades are very sharp. Place the disassembling tool onto a sta-
ble surface (table or counter). Insert the cutting assembly with the lower pair of
blades into the well of the disassembling tool. Hold the blade shaft tightly at the
upper plastic end. Then grasp the removable pair of blades at the fluted part of
its plastic body and turn it clockwise to unlock it. Pull the pair of blades upwards
to remove it from the cutting assembly. If required, repeat this procedure for the
other removable pair of blades.
… 43 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gastroback 40961 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gastroback 40961 in the language / languages: English, German as an attachment in your email.

The manual is 0,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info