714687
40
Zoom out
Zoom in
Previous page
1/48
Next page
40
Tip: Depending on the desired results, you may use one or both removable pairs
of blades in combination with the fixed pair of blades.
5. Fill your prepared food into the glass container, but do not overfill the glass con-
tainer. Observe the appropriate filling levels: - wet, solid food: MAX filling level
(600 ml / 20 oz. / 2 1/2 cups); - liquids: max. 400 ml; - frothing food: max.
200 ml.
6. Ensure that the lid seal of the lid is correctly in place. Then place the lid onto the glass
container. The handles of the lid must fit onto the handles of the glass container.
7. Place the motor unit onto the lid and turn it slightly until it settles down firmly.
Important: The appliance will not turn on unless it has been assembled completely
and correctly according to the following instructions.
8. Insert the power plug of the appliance in the wall power outlet.
9. While holding the motor unit slightly down, press the ON/OFF button to switch
ON the appliance.
Note
You can use two speed levels. For using speed 1, only press the ON/OFF button
slightly. When pressing down the ON/OFF button firmly, speed 2 is active. For
selecting an appropriate speed for the desired results, see: ‘Tips for Best Results’.
Important: The appliance will process your food within a few seconds. Do not let
the motor operate continuously for more than 10 seconds. If required, make inter-
mediate brakes of 10 seconds and/or operate the appliance in pulses.
10. As soon as your food reached the desired consistency, release the ON/OFF
button to stop operation. Then unplug the appliance.
WARNING: After grinding very dry ingredients (e.g. sugar, cereals), always
wait at least 1 minute before opening the lid. Always keep away any sources of
ignition (e.g. fire, lit cigarettes) to avoid the risk of dust explosion.
11. Take out your food. For this, remove the motor unit and lid. Then grasp the cut-
ting assembly by the upper end of the blade shaft and pull the cutting assembly
out of the glass container. Empty the glass container.
12. Thereafter, if required, you may process the next portion of your food. For this,
simply replace the cutting assembly in the glass container, and start operation
again by beginning with step 3.
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gastroback 40961 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gastroback 40961 in the language / languages: English, German as an attachment in your email.

The manual is 0,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info