714687

Gastroback 40961 Manual

39
Zoom out
Zoom in
Previous page
1/48
Next page
39
Place the appliance on a firm, flat, stable, and dry surface. Do not place the appli-
ance near the edge of the working space.
To avoid overheating, do not operate the motor continuously for more than 10
seconds. Allow the motor to rest for at least 10 seconds before continuing. If the cut-
ting assembly gets stuck or the motor agitates noticeably slow, stop operation imme-
diately (release the ON/OFF button), and remove the obstacle in the glass contai-
ner (see: ‘Care and Cleaning’). Reduce the amount of food in the glass container.
Ensure not to overfill the glass container to avoid overflow. Observe the given maxi-
mum filling levels for various types of food. Divide up your food into appropriate
portions.
Do not use any hard or edged objects (e.g. knives, metal scrapers) with the appli-
ance to avoid damage to the surfaces and blades. Always remove inedible and
extremely hard parts (e.g. kernels, stalks, shells) before processing to avoid damage
to the blades.
ASSEMBLING THE APPLIANCE AND PROCESSING YOUR FOOD
1. Prepare your food (see: ‘Tips for Best Results’). Remove all inedible parts and cut
your food in pieces of sufficient size (approx. 3 - 4 cm).
2. Place the silicone ring on a stable, level surface near an appropriate wall power
outlet. Leave a distance of at least 20 cm to the edge of the table or counter and
to any other object. Then place the glass container right onto the middle of the
silicone ring. The glass container may not tilt or wobble.
WARNING: The blades are very sharp. Only touch the pairs of blades and the
blade shaft by their plastic parts. Do not touch the blades with unprotected hands to
avoid severe injuries!
3. Place the blade shaft with the lower pair of blades facing downward onto the
fixed shaft in the glass container.
4. According to the type and amount of food and desired consistency, you may
install the middle pair of blades and/or upper pair of blades in addition (see:
‘Tips for Best Results’).
For this grasp the desired pair of blades by the fluted side of the plastic part, and
put it onto the blade shaft. If necessary, turn it a little until it slips downward into posi-
tion. Then, while holding the upper part of the blade shaft, turn the pair of blades
counter-clockwise to lock it onto the blade shaft.
… 39 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gastroback 40961 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gastroback 40961 in the language / languages: English, German as an attachment in your email.

The manual is 0,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info