714632
73
Zoom out
Zoom in
Previous page
1/88
Next page
EN
73
METHODS FOR REMOVING OBSTACLES
During juicing, check for the juice running out of the juice spout freely. Additionally,
the pulp must move automatically through the pulp outlet in small heaps. Without
pulp and juice coming out, check if the juicing system is blocked.
WARNING – To avoid risk of injuries, do not grasp into the juicing system
or insert any foreign objects into the juicing system, while the appliance is live.
Always switch off (power switch to “O”) and unplug the appliance, before ope-
ning the juicer cover.
WARNING – Do not let the filling level within the juice collector move up
beyond the upper rim of the separating mesh. Additionally, do not attempt to
remove the squeezing auger with the juice collector mounted on the motor
base. Otherwise, overflow of the juice collector could occur with liquids running
onto the motor base. If liquids ran onto the motor base, in any case, immediately
unplug the appliance and clean the appliance (see: ‘Care and Cleaning’).
CAUTION – Switch off the appliance at once, if any extremely hard parts
of the food get clamped between the filter sleeve and juice collector. You need to
remove and disassemble the juicing system for removing these obstacles to avoid
damage to the filter sleeve and juice collector (see: ‘Care and Cleaning / Disas-
sembling the Juicing System’).
Start your search for obstacles at the feed chute: Pieces of food may be wedged
together within the feed chute or the squeezing auger cannot take them in.
What you may try about it: Use the pusher for gently and slowly pushing your
food down until the squeezing auger takes it in automatically.
Ingredients containing a lot of tough fibres could clog the juice collector and/or
block the separating mesh of the filter sleeve. This may occur especially, when
filling too much hard pieces into the feed chute simultaneously and/or applying
hard pressure to the pusher during juicing.
What you may try about it: Repeatedly applying reverse operation may be
useful (see: ‘Using Reverse Operation’).
Residues of pulp could clog the pulp outlet or juice spout. As a final result, this
may lead to overflow.
What you may try about it: When the filling level in the juice collector moved
up almost to the upper rim of the separating mesh, you need to remove the com-
plete juicing system and pour out the juices over a sufficient bowl. Then rinse the
73


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gastroback 40145 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gastroback 40145 in the language / languages: English, German as an attachment in your email.

The manual is 0,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info