714632
71
Zoom out
Zoom in
Previous page
1/88
Next page
EN
71
CAUTION – Ensure that the juice collector is not filled above the upper rim
of the separating mesh to avoid overflow. Always immediately unplug the appli-
ance, when liquids run onto the motor base and/or run out below the juice colle-
ctor. Clean and dry the appliance, when liquids have been spilled on the motor
base (see: ‘Care and Cleaning’).
NOTE
If the usage of the pusher is required, press your food down slowly and evenly,
but do not apply too much pressure to get the optimum amount of juices. When
pressing too hard, the pulp will be very wet and there will be only little juice. Addi-
tionally, the juicing system may get clogged easily.
During operation, ensure to avoid overfilling the containers for juice and pulp.
Check, whether the juices are running and pulp is produced. The pulp must fall easi-
ly and without obstacles into the pulp container (see: ‘Methods for Removing Obsta-
cles’ and ‘Solving Problems’).
NOTE
When extracting juicy types of fruit and vegetables, you may repeatedly operate
the juicer in forward and reverse operation for a while for getting the optimum
amount of juice (see: ‘Using Reverse Operation’).
IMPORTANT - Before toggling to reverse operation and back, always switch to
the off position (“O”) to make the motor stop completely. If reverse operation does
not work for getting the juicing system free of obstacles, you need to disassemble
the juicing system (see: ‘Care and Cleaning / Disassembling the Juicing System’).
However, do not attempt to remove the squeezing auger, while the juicing sys-
tem is placed on the motor base. Otherwise, liquids could run onto the motor base.
6. When the motor stalks or runs unusually slowly during juicing, try reverse operati-
on intermediately via the lower position of the power switch (“R”; see: ‘Methods
for Removing Obstacles’).
7. For juicing larger amounts of food, make breaks of approx. 30 minutes after eve-
ry 15 minutes of continuous operation. During your breaks, switch off the motor
(power switch to the central position “O”), and unplug the appliance. You may
use the breaks for preparing the next portion.
8. After juicing, switch the power switch to “O”, and unplug the appliance. Remo-
ve the juicing system from the motor base (see: ‘Care and Cleaning / Disassem-
bling the Juicing System’).
71


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gastroback 40145 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gastroback 40145 in the language / languages: English, German as an attachment in your email.

The manual is 0,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info