714632
74
Zoom out
Zoom in
Previous page
1/88
Next page
EN
74
pulp outlet and/or juice spout thoroughly. If applicable and performed in time,
process fibrous ingredients and very juicy ingredients in alternation. However,
do not let the filling level move up above the upper rim of the separating
mesh.
When reverse operation and alternation of ingredients do not work, you need
to remove the juicing system from the motor base. Thereafter, disassemble and
clean the parts for removing the obstacles (see: ‘Care and Cleaning / Removing
Residues of Fibres from the Filter Sleeve’).
NOTE
When the motor stops unexpectedly after an elongated period of continuous ope-
ration, the protection device may have been triggered (see: ‘Solving Problems’
and ‘Resetting the Protection Device’).
RESETTING THE PROTECTION DEVICE
IMPORTANT - Do not let the motor operate continuously for more than 15 Minutes.
Let the motor cool down for at least 30 Minutes after each 15 Minutes of conti-
nuous operation. Additionally, if the motor gets stuck due to hard pieces of food
clamped between the squeezing auger and filter sleeve, immediately switch off the
motor (power switch to “O”; see: ‘Methods for Removing Obstacles’).
If the protection device has been triggered, the motor stops operation immediately.
Even after cooling down the motor does not work (see: ‘Properties of Your New
Juicer / Safety Features’). You need to reset the protection device manually for ope-
rating the appliance again.
1. Switch off (power switch to “O”) and unplug the appliance.
2. Remove the juicing system from the motor base (see: ‘Care and Cleaning /
Disassembling the Juicing System’). Remove any obstacles and let the motor cool
down for 30 - 40 minutes.
3. With the motor cooled down, turn the motor base upside down. The protection
switch (“reset”) is located at the bottom of the motor base. Press the protection
switch. If required, use a ballpoint pen or pencil.
4. Thereafter, reassemble the juicing system correctly and completely (see: ‘Assem-
bling the Juicing System’). Thereafter, you may operate the appliance quite as
usual.
74


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gastroback 40145 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gastroback 40145 in the language / languages: English, German as an attachment in your email.

The manual is 0,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info