Manual Garmin GPSMAP 2110 (page 17 of 106) (English)

583758

17

Zoom out

Zoom in

Previous page

1/106

Next page

GPSMAP 2106/2110 Owner’s Manual 9

BASIC OPERATION > USING THE GPSMAP 2106/2110

Selecting Options and Entering Data

To select options and enter data, use the ROCKER to highlight or select an item

in a list or a ﬁeld on the screen. Use the ENTER key, soft keys, data entry keys,

and the ROCKER to select options, enter names and numbers in data ﬁelds, and

activate your selections.

To select an optional feature:

1. From any page, press ADJ. The adjustment menu shows a list of optional

features speciﬁc to that page.

2. Use the ROCKER to move the highlight up, down, left, or right to the

selection you want, and press ENTER to select the option.

OR

Press the soft key below the option you want to select.

To select an on-screen button:

On a page with on-screen buttons, use the ROCKER to highlight an

on-screen button, and press ENTER.

To select an option using soft keys:

Press the soft key button below the soft key you want to select.

To select an option using data entry shortcut keys:

1. From any page, press ADJ. The adjustment menu for the current page or

selected function appears.

2. Press the data entry key that corresponds to the option you want to select.

For numbers 10 and higher, press the ﬁrst digit, and then press the second

digit within one second.

Data entry

key shortcut

numbers

Soft keys

To exit a menu or return to the previous setting:

Press QUIT. The QUIT key moves backward through your steps. Press

QUIT repeatedly to return to the starting page.

To enter data in a data ﬁeld:

1. Use the ROCKER to highlight the data ﬁeld, and press ENTER.

2. Press up or down on the ROCKER to select characters. Press and release

the ROCKER to move character by character through the list; press and

hold the ROCKER to move rapidly through the list.

3. Press right on the ROCKER to move to the next character on the line

or press left to move back to the previous character. Press left on the

ROCKER from the ﬁrst character position to clear the ﬁeld. If there are

more than two lines of data, keep pressing right on the ROCKER to go to

the next line.

4. Press ENTER to accept data and move to the next ﬁeld.

Not all data ﬁelds are programmable. When moving about a page with these

ﬁelds, the highlight skips them.

1

I have acquired a Garmin 2110 with a GPS17.
The cable between the two has been carefully cut - I assume to remove it from the previous vessel. I have connected all the cables together as per the Basic Installation shown in the handbook. All works fine.
My question is how can i reconnect the two (front and rear) looms together. The wires from the GPS17 are too fine to solder and not of sufficient size as to allow connection by electrical Mobloc.
Can anyone help me by telling me what they have used to connect these looms together?
Thanks in anticipation
Ian Hutchinson Submitted on 15-4-2021 at 11:46
Reply Report abuse
I have just acquired a Garmin 2110 and GPS17.
The wires that connect the two together have been carefully cut - I assume to enable the units to be removed from the previous vessel. I have connected all the wiring together as per the Basic Wiring diagram and all worked perfectly.
However the wires from the GPS17 are extreamly delicate and will not (maybe my inexperience ) allow solder connections in order to make the installation complete. My question is what can I use to make a permanent fixing of the two (front and rear) looms?
I have tried using a small mobloc but the wires in the GPS17 loom are too fine to make a good connection.
Any help would be greatly appreciated
Ian Hutchinson Submitted on 15-4-2021 at 11:25
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

Register

Register getting emails for Garmin GPSMAP 2110 at:

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Garmin GPSMAP 2110 in the language / languages: English as an attachment in your email.

The manual is 6,07 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info