584001
90
Zoom out
Zoom in
Previous page
1/124
Next page
Page 5-8 400 SERIES INSTALLATION MANUAL
Page Rev L P/N 190-00140-02
5.2.9 MAIN DISCRETE OUTPUTS Page
Select the MAIN DISCRETE OUTPUTS Page (see Figure
5-11). This page allows you to verify the operation of any
external annunciators and switches that are present in the
installation.
DISCRETE TOGGLE
Selection Verify That:
APR
The APR annunciator is active and inactive as selected on this page.
GPS
The GPS source select annunciator is active and inactive as selected on this
page.
INTEG
The INTEG annunciator is active and inactive as selected on this page.
MSG
The MSG annunciator is active and inactive as selected on this page.
OBS
The OBS annunciator is active and inactive as selected on this page.
TERM
The TERM annunciator is active and inactive as selected on this page.
VLOC
The VLOC source select annunciator is active and inactive as selected on this
page.
WPT
The WPT annunciator is active and inactive as selected on this page.
ILS/GPS APR
The ILS/GPS APPROACH output is active and inactive as selected on this
page (NOTE: This output is connected to the autopilot ILS ENGAGE input,
not to an annunciation, and therefore this is for bench testing purposes only).
5.2.10 MAIN CDI/OBS CONFIG Page
Select the MAIN CDI/OBS CONFIG Page (see Figure 5-
12). This page allows you to verify the MAIN CDI
outputs, both lateral (LAT) and vertical (VERT), and
verify and calibrate the MAIN OBS input. Using the
controls on the 400 Series unit front panel, make the
selections below and verify the interfaces as appropriate:
CDI (LAT/VERT)
Selection Verify That:
Max left/up
The CDI is “pegged” to the left/up.
Full left/up
The CDI is deflected full scale to the left/up.
Center
The CDI is centered.
Full right/down
The CDI is deflected full scale to the right/down.
Max right/down
The CDI is “pegged” to the right/down.
NAV FLAG (LAT/VERT)
Selection Verify That:
Hidden
The LAT/VERT flag is hidden.
In view
The LAT/VERT flag is in view.
Figure 5-11.
MAIN DISCRETE OUTPUTS Page
Figure 5-12.
MAIN CDI/OBS CONFIG Page
90


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin GNS 430 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin GNS 430 in the language / languages: English as an attachment in your email.

The manual is 4,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info